We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANS4-60
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are pursuing MISUMI SANS4-60, make contact with FAMAGA, the world's main producer of factory-made equipment. Our company has worked for more than ten years - these are cycles of experience, which are expressed in the quality of products and special attention to each user. We admire everyone, who engaged with us - thus, our regular buyers obtain the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4500 such buyers, and we constantly make new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Zimbabwe, Samoa, Libya, China, Ghana, Benin, East Timor, Grenada, Kuwait, Bahamas, Monaco, Belgium, Haiti, Slovenia, Togo, Nicaragua, Tunisia, Macedonia, Cape Verde, Afghanistan, United Arab Emirates, Belize, The Bahamas, Brunei, Mozambique, Syria, South Korea, Jordan, Mexico, Ukraine, Costa Rica, Chile, Qatar, Senegal, Bolivia, Austria, Tajikistan, North Korea, Croatia, Sudan, United States, Thailand, Nepal, Egypt, Dominica, Uruguay, Pakistan, Slovakia. A well-developed logistics bond and a partnership network assist us to conduct our units anywhere in the earth immediately without disreputing product quality.
A special source of good name for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this number is ascending every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To request or order, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | ?1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |