We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANS12-50
Description
Adjusting Stopper Screws/Wrench Flat/L Selectable/Fine Thread
Stock availability:
On request
If you are seeking MISUMI SANS12-50, catch up with FAMAGA, the world's dominant provider of mechanized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are expressed in the quality of products and individual attention to each consumer. We praise everyone, who cooperated with us - therefore, our regular consumers obtain the most convenient purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such customers, and we constantly compose new agreements. More than 600 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Mexico, Bangladesh, Mauritania, Iraq, Madagascar, Guinea, Cameroon, Papua New Guinea, Fiji, Belize, Turkmenistan, Russia, Guatemala, Nigeria, Niger, Belarus, Costa Rica, Botswana, Macedonia, Panama, Malawi, Dominica, El Salvador, Suriname, India, Mauritius, Brazil, Croatia, Iran, Finland, Nicaragua, Ireland, Equatorial Guinea, Vietnam, Laos, Peru, Indonesia, The Gambia, Jamaica, Swaziland, Cyprus, Qatar, Afghanistan, Thailand. A well-built logistics bond and a partnership network allow us to conduct our elements anywhere in the earth on-time without compromising product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or order, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Adjusting Stopper | Wrench Flats | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | |
Material | Surface Treatment | |||||
Fine | ANS | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANS | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - | |
Coarse | ANSN | EN 1.1191 Equiv. | 45~50HRC | Trivalent Chromate | EN 1.0038 Equiv. | Trivalent Chromate |
SANSN | EN 1.4031 Equiv. | 45HRC~ | - | EN 1.4301 Equiv. | - |
Part Number | - | L |
ANS6 SANSN10 | - - | 60 50 |
M | MxPitch | A | ?1 | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 2.5 | 4 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 3 | 4 | 7 | 8.1 | 4 | |
5 | 5x0.5 | 5x0.8 | 4 | 5 | 8 | 9.2 | ||
6 | 6x0.75 | 6x1.0 | 5 | 5 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 6 | 6 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 8 | 8 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 10 | 10 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 14 | 14 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 17 | 17 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANS, ANSN | SANS, SANSN | |||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||
(Fine) ANS SANS (Coarse) ANSN SANSN | 3 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||
8 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | |||||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | |||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | |||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |