We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SANB3-20
Description
Adjusting Stopper Screws/Hexagon Socket/L Configurable/Fine Thread
Stock availability:
On request
If you are seeking MISUMI SANB3-20, get in touch with FAMAGA, the world's dominant provider of industrial equipment. Our company has functioned for more than ten years - these are years of experience, which are expressed in the quality of products and private attention to each purchaser. We admire everyone, who liased with us - thus, our regular consumers get the most acceptable purchase conditions and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such consumers, and we constantly arrange new agreements. More than 750 proceedings are resolved per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Egypt, Poland, The Bahamas, Russia, Mali, Vietnam, Mexico, Tajikistan, Seychelles, Finland, United States, Oman, East Timor, Zimbabwe, Nicaragua, Cameroon, Yemen, North Korea, Bolivia, Jamaica, Mauritius, Nepal, South Sudan, Mongolia, Suriname, Armenia, Uganda, Ireland, Georgia, Mozambique, Angola, Chile, Belarus, Peru, Haiti, China, Luxembourg, Tunisia, Botswana, The Gambia, Panama. A well-elaborated logistics system and a partnership network allow us to ship our units anywhere in the earth immediately without damaging product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the range of factory-made equipment.
All merchandises from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been provided, and this number is increasing every day. We are happy that consumers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, contact us or write to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Adjusting Stopper | Hex Socket Type | Material | Hardness* | Surface Treatment | Accessory (Nut 1 pc.) | ||
L Selectable | L Configurable | Material | Surface Treatment | ||||
Fine | ANBM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANB | ANFB | Trivalent Chromate | |||||
ANBH | ANFBH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBS | ANFBS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANB | SANFB | EN 1.4031 Equiv. | 45HRC~ | - | |||
Coarse | ANBNM | - | EN 1.1191 Equiv. | 45~50HRC | Electroless Nickel Plating | EN 1.0038 Equiv. | Trivalent Chromate |
ANBN | ANFBN | Trivalent Chromate | |||||
ANBNH | ANFBNH | EN 1.7220 Equiv. | 50HRC~ | ||||
ANBNS | ANFBNS | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | - | |
SANBN | SANFBN | EN 1.4031 Equiv. | 45HRC~ | - |
Part Number | - | L |
ANB8 ANBM5 | - - | 40 30 |
M | MxPitch | B1 | ? | SR | B | (C) | T | |
Fine | Coarse | |||||||
3 | 3x0.35 | 3x0.5 | 1.5 | 1.5 | 3 | 5.5 | 6.4 | 2.4 |
4 | 4x0.5 | 4x0.7 | 2 | 2.2 | 4 | 7 | 8.1 | 4 |
5 | 5x0.5 | 5x0.8 | 2.5 | 2.8 | 5 | 8 | 9.2 | |
6 | 6x0.75 | 6x1.0 | 3 | 3 | 6 | 10 | 11.5 | |
8 | 8x0.75 | 8x1.25 | 4 | 4 | 8 | 13 | 15 | 5 |
10 | 10x1.0 | 10x1.5 | 5 | 5 | 10 | 17 | 19.6 | 6 |
12 | 12x1.0 | 12x1.75 | 6 | 6 | 12 | 19 | 21.9 | |
16 | 16x1.5 | 16x2.0 | 8 | 7 | 16 | 24 | 27.7 | 8 |
20 | 20x1.5 | 20x2.5 | 10 | 8 | 20 | 30 | 34.6 | 10 |
Part Number | L Selection | ANB, ANBN | ANBS, ANBNS | SANB, SANBN | ||||||||||||||||||
Type | M | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | Unit Price | Volume Discount Rate | |||||||||||||||
1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | |||||||||||||||||
(Fine) ANB ANBS SANB (Coarse) ANBN ANBNS SANBN | ?3 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | ||||||||||||||
?4 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
?5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||
?6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||||||||
?8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||||||||||||
10 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | |||||||||||
12 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | ||||||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 | |||||||||||||
20 | 45 | 50 | 60 | 70 | 80 | 90 | 100 | 120 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||
(Fine) ANBM (Coarse) ANBNM | 3 | 15 | 20 | 25 | |||||||||
4 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
5 | 15 | 20 | 25 | 30 | 35 | 40 | |||||||
6 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | ||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||
12 | 40 | 45 | 50 | 60 | 70 |
Part Number | L Selection | Unit Price | Volume Discount Rate | ||||||||||||
Type | M | 1 ~ 49 pc(s). | 50 ~ 100 pcs. | ||||||||||||
(Fine) ANBH (Coarse) ANBNH | 3 | 20 | 25 | 30 | 35 | 40 | |||||||||
4 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
5 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
6 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
8 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | |||||||
10 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | ||||||||
12 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | ||||||||
16 | 40 | 45 | 50 | 60 | 70 | 80 | 100 | ||||||||
20 | 45 | 50 | 60 | 70 | 80 | 100 | 120 |
Part Number | L 1mm Increment | Unit Price | ||||
Type | M | ANFB, ANFBN | ANFBH, ANFBNH | ANFBS, ANFBNS | SANFB, SANFBN | |
(Fine) ANFB ANFBH ANFBS SANFB (Coarse) ANFBN ANFBNH ANFBNS SANFBN | 3 | 10~40 | ||||
4 | 10~60 | |||||
5 | 10~60 | |||||
6 | 15~60 | |||||
8 | 15~60 | |||||
10 | 20~100 | |||||
12 | 30~100 | |||||
16 | 40~120 | |||||
20 | 40~120 |