We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI PXYK12, get in touch with FAMAGA, the world's dominant company of manufacturing equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each consumer. We respect everyone, who worked with us - so, our regular buyers procure the most favorable purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such buyers, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Tonga, Papua New Guinea, Romania, Greece, Cape Verde, Nepal, Poland, Comoros, Serbia, Mongolia, Kyrgyzstan, Eritrea, Mauritius, The Bahamas, United States, Andorra, Pakistan, Zimbabwe, South Korea, Mali, Ireland, Indonesia, Russia, Jamaica, Morocco, Mauritania, Armenia, Croatia, Bosnia and Herzegovina, Swaziland, Egypt, Vietnam, Suriname, Estonia, Afghanistan, Central African Republic, Seychelles, Cyprus, Finland, Nigeria, Syria, North Korea, Dominica, Ukraine. A well-built logistics bond and a partnership network let us to dispatch our items anywhere in the planet with no delay without discrediting product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All outcomes from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more developed and technologically advanced industrial equipment so as to stay on the top.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Screw | Returning | Rest Position | Knob | Main Body | Pin | Spring | (Lock Nut) | ||||
Material | Material | Surface Treatment | Material | Hardness | Surface Treatment | Material | Material | Surface Treatment | |||
Fine Thread | PXA | PXYA | Nylon 6 (Matt Black) | EN 1.0715 Equiv. | Black Oxide | EN 1.1191 Equiv. | 50~60HRC | Black Oxide | JIS-SWP-B | - | - |
PXK | PXYK | EN 1.1191 Equiv. | Black Oxide | ||||||||
SXPA | - | EN 1.4305 Equiv. | - | EN 1.4305 Equiv. | - | Nickel Plating | EN 1.4319 Equiv. | - | - | ||
SXPK | SXYK | EN 1.4305 Equiv. | - | ||||||||
Coarse Thread | PMXA | PMXYA | EN 1.0715 Equiv. | Trivalent Chromate | - | - | - | ||||
PMXK | PMXYK | EN 1.1191 Equiv. | Trivalent Chromate |
Part Number |
SXPA16 PMXK10M |
M | Pitch (Fine Thread) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | SW1 | SW2 | Load (N) | Mass (g) | |||||||
Returning | Rest Position | PXA, PXYA PXK, PXYK | SXPA SXPK, SXYK | PXA SXPA | PXK SXPK | PXYA | PXYK SXYK | ||||||||||||||
min. | max. | min. | max. | ||||||||||||||||||
10 | 1.0 | 21 | 13.8 | 5 | 5 | 45 | 51 | 17 | 5 | 15 | 5 | 12 | 17 | 7 | 17 | 6 | 15 | 20 | 27 | 23 | 30 |
12 | 1.5 | 25 | 16.2 | 6 | 6 | 54.5 | 61 | 20 | 6 | 17 | 6 | 14 | 18 | 9 | 24 | 8 | 21 | 32 | 42 | 38 | 48 |
16 | 1.5 | 31 | 21.9 | 8 | 8(7) | 69 | 75.5 | 26 | 8 | 23 | 8 | 19 | 24 | 11 | 30 | 9 | 26 | 70 | 90 | 79 | 99 |
Part Number | Pitch (Coarse Thread) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | L5 | SW1 | SW2 | Load (N) | Mass (g) | Unit Price | |||||||
Returning | Rest Position | ||||||||||||||||||||||
Type | M | min. | max. | PMXA | PMXK | PMXYA | PMXYK | PMXA PMXYA | PMXK PMXYK | ||||||||||||||
PMXA PMXK PMXYA PMXYK | 6M | 1.0 | 12 | 6.9 | 4 | 4 | 30.5 | 33 | 12 | 4.5 | 10 | 3.2 | 7 | 6 | 10 | 3 | 12 | 5 | 9 | 4 | 8 | ||
8M | 1.25 | 16 | 9.2 | 5 | 5 | 40 | 43.5 | 16 | 6 | 14 | 4 | 9.5 | 8 | 13 | 5 | 24 | 10 | 15 | 11 | 16 | |||
10M | 1.5 | 18 | 11.5 | 6 | 6 | 49 | 52 | 20 | 7.5 | 18 | 5 | 10.5 | 10 | 16 | 5 | 21 | 17 | 24 | 18 | 15 | |||
12M | 1.75 | 21 | 13.8 | 8 | 8 | 59 | 63.5 | 24 | 9 | 22 | 6 | 13.5 | 12 | 18 | 6 | 22 | 31 | 41 | 36 | 46 |
M | Allowable Tightening Torque (N • m) |
6 | 1.5 |
8 | 9 |
10 | 20 |
12 | 25 |