We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing MISUMI PMXK10M, communicate with FAMAGA, the world's primary retailer of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of products and special attention to each user. We appreciate everyone, who conspired with us - hence, our regular customers obtain the most helpful purchase forms and discounts on the industrial equipment market. Now, there are more than 4500 such clients, and we constantly make new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Bahrain, Malawi, Italy, Tanzania, Afghanistan, Mozambique, Japan, East Timor, Indonesia, Romania, Guinea, Poland, Paraguay, Ukraine, Ireland, Chad, Kuwait, Australia, Nicaragua, Slovakia, United Arab Emirates, Jamaica, Namibia, Syria, Iceland, The Bahamas, Ghana, Benin, Djibouti, Croatia, Liechtenstein, Sweden, Libya, Peru, Russia, Iraq, Panama, Norway, Angola, Rwanda, Dominica, Suriname, United States, Madagascar, Belarus, Mauritius. A well-elaborated logistics link and a partnership network let us to send our products anywhere in the world promptly without discrediting product quality.
A specific source of pride for FAMAGA is its workers, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of machine made streamlined equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are proud that purchasers choose FAMAGA again and again, and we are eager to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, phone us or write a message to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Screw | Returning | Rest Position | Knob | Main Body | Pin | Spring | (Lock Nut) | ||||
Material | Material | Surface Treatment | Material | Hardness | Surface Treatment | Material | Material | Surface Treatment | |||
Fine Thread | PXA | PXYA | Nylon 6 (Matt Black) | EN 1.0715 Equiv. | Black Oxide | EN 1.1191 Equiv. | 50~60HRC | Black Oxide | JIS-SWP-B | - | - |
PXK | PXYK | EN 1.1191 Equiv. | Black Oxide | ||||||||
SXPA | - | EN 1.4305 Equiv. | - | EN 1.4305 Equiv. | - | Nickel Plating | EN 1.4319 Equiv. | - | - | ||
SXPK | SXYK | EN 1.4305 Equiv. | - | ||||||||
Coarse Thread | PMXA | PMXYA | EN 1.0715 Equiv. | Trivalent Chromate | - | - | - | ||||
PMXK | PMXYK | EN 1.1191 Equiv. | Trivalent Chromate |
Part Number |
SXPA16 PMXK10M |
M | Pitch (Fine Thread) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | SW1 | SW2 | Load (N) | Mass (g) | |||||||
Returning | Rest Position | PXA, PXYA PXK, PXYK | SXPA SXPK, SXYK | PXA SXPA | PXK SXPK | PXYA | PXYK SXYK | ||||||||||||||
min. | max. | min. | max. | ||||||||||||||||||
10 | 1.0 | 21 | 13.8 | 5 | 5 | 45 | 51 | 17 | 5 | 15 | 5 | 12 | 17 | 7 | 17 | 6 | 15 | 20 | 27 | 23 | 30 |
12 | 1.5 | 25 | 16.2 | 6 | 6 | 54.5 | 61 | 20 | 6 | 17 | 6 | 14 | 18 | 9 | 24 | 8 | 21 | 32 | 42 | 38 | 48 |
16 | 1.5 | 31 | 21.9 | 8 | 8(7) | 69 | 75.5 | 26 | 8 | 23 | 8 | 19 | 24 | 11 | 30 | 9 | 26 | 70 | 90 | 79 | 99 |
Part Number | Pitch (Coarse Thread) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | L5 | SW1 | SW2 | Load (N) | Mass (g) | Unit Price | |||||||
Returning | Rest Position | ||||||||||||||||||||||
Type | M | min. | max. | PMXA | PMXK | PMXYA | PMXYK | PMXA PMXYA | PMXK PMXYK | ||||||||||||||
PMXA PMXK PMXYA PMXYK | 6M | 1.0 | 12 | 6.9 | 4 | 4 | 30.5 | 33 | 12 | 4.5 | 10 | 3.2 | 7 | 6 | 10 | 3 | 12 | 5 | 9 | 4 | 8 | ||
8M | 1.25 | 16 | 9.2 | 5 | 5 | 40 | 43.5 | 16 | 6 | 14 | 4 | 9.5 | 8 | 13 | 5 | 24 | 10 | 15 | 11 | 16 | |||
10M | 1.5 | 18 | 11.5 | 6 | 6 | 49 | 52 | 20 | 7.5 | 18 | 5 | 10.5 | 10 | 16 | 5 | 21 | 17 | 24 | 18 | 15 | |||
12M | 1.75 | 21 | 13.8 | 8 | 8 | 59 | 63.5 | 24 | 9 | 22 | 6 | 13.5 | 12 | 18 | 6 | 22 | 31 | 41 | 36 | 46 |
M | Allowable Tightening Torque (N • m) |
6 | 1.5 |
8 | 9 |
10 | 20 |
12 | 25 |