We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing MISUMI PHLM140-18, connect FAMAGA, the world's central distributor of machine made equipment. Our company has functioned for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and private attention to each orderer. We praise everyone, who engaged with us - therefore, our regular clients receive the most beneficial purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4 thousand such purchasers, and we constantly arrange new agreements. More than 700 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Togo, Afghanistan, Guinea-Bissau, Mauritius, Denmark, Malaysia, Fiji, Slovakia, Albania, Australia, Samoa, Tajikistan, Canada, Egypt, Botswana, Thailand, Cape Verde, Japan, Dominica, Estonia, Comoros, South Sudan, South Korea, United Arab Emirates, Liberia, Swaziland, Kyrgyzstan, Burundi, Morocco, Moldova, Angola, Argentina, Indonesia, Kuwait, Seychelles, Kenya, Mauritania, Vietnam, United States, Serbia, Brunei. A well-elaborated logistics system and a partnership network allow us to dispatch our elements anywhere in the world promptly without disreputing product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of industrial equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is amounting every day. We are glad that consumers choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
I.D. Shaft Bore Shape | Type | Hub | Handwheel | Handle Mounting Hole Insert | Handle | Handle Thread | ||||
Stationary Handles | Folding Handles | Without Handle | Material | Surface Treatment | Material | Material | Material | Material | Surface Treatment | |
*1 No Hole | PHLN | PHLFN | - | EN-JL 1030 Equiv. | Black Oxide | Phenol | Brass | Phenol | EN 1.0711 Equiv. | Trivalent Chromate |
- | - | PHLN-R | Nylon 6 | EN 1.0715 Equiv., Trivalent Chromate | ||||||
H9 Hole + Tap | PHLM | PHLFM | - | Phenol | Brass | |||||
PHLSM | - | - | EN 1.4305 Equiv. | - | ||||||
H9 Hole + Keyway + Tap | PHLK | PHLFK | - | EN-JL 1030 Equiv. | Black Oxide | |||||
PHLSK | - | - | EN 1.4305 Equiv. | - | ||||||
Square Bore | PHLW | PHLFW | - | EN-JL 1030 Equiv. | Black Oxide | |||||
Slit | PHLP | - | - | EN 1.1191 Equiv. | Black Chromate | Polypropylene |
Part Number | - | d |
PHLN80 | ||
PHLM100 | - | 12 |
PHLP125 | - | 12 |
Part Number | H9 Hole + Tap | H9 Hole + Keyway + Tap | Square Bore | Slit | H | A | D1 | D2 | D3 | L | L1 | d1 | h1 | X | Y | R (Dia.) | d3 | M (Coarse) | M2 (Coarse) | P | PHLP (Reference Tightening Torque) | B | G | Mass (g) | ||||||||||
PHL? | PHLF? | PHL? | PHLF? | PHL? | PHLF? | |||||||||||||||||||||||||||||
Type | D | d Selection | M1 (Coarse) | d1 | b | t | W Selection | d2 | ||||||||||||||||||||||||||
No Hole PHLN PHLFN H9 Hole + Tap PHLM PHLFM PHLSM | H9 Hole + Keyway + Tap PHLK PHLFK, PHLSK Square Bore PHLW, PHLFW Slit PHLP | 80 | *10, | *12, | 14 | 5 | 10 | 3 | 1.4 | 10 | 10 | 32 | 13 | 20 | 28.5 | 30.2 | 25 | 25 | 23.3 | 9 | 9 | 7 | 8.5 | 4.5 | 8 | 4 | 26 | 3 | 20 | 19.6 | 40 | 55 | 135 | 177 |
100 | 10, | *12, | *15 | 12 | 4 | 1.8 | 12 14 | 12 | 36 | 25 | 35 | 37.1 | 28 | 28 | 10 | 9 | 10 | 5.5 | 5 | 37 | 5 | 200 | 242 | |||||||||||
125 | *12, | *16, | 18 | 40 | 17 | 30 | 40 | 30 | 29.45 | 50 | 19.7 | 55 | 81.5 | 330 | 410 | |||||||||||||||||||
140 | *15, | 18, | *20 | 6 | 15 | 5 | 2.3 | - | 41 | 18 | 44.9 | - | - | 31.1 | 11 | - | - | - | - | 10 | - | 55 | - | 23 | 22.6 | 67 | 104 | 410 | 565 | |||||
160 | 16, | 18, | 20 | 16 | 5 | 2.3 | - | 47 | 20 | 45.3 | - | 35 | - | 65 | 485 | 640 | ||||||||||||||||||
180 | 16, | 18, | 20 | 14 17 | 50 | 23 | 35 | 49.9 | - | - | 73 | 640 | 795 | |||||||||||||||||||||
200 | 16, | 18, | 20 | 54 | 50 | - | 40 | - | 80 | 24 | 75 | 780 | 935 | |||||||||||||||||||||
No Hole, Without Handle PHLN-R | 250 | - | - | - | - | - | - | - | 66 | 26 | - | 44 | - | 42 | - | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | 980 | - |