We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking MISUMI PHLM100-10, communicate with FAMAGA, the world's primary vendor of industrial equipment. Our company has operated for more than ten years - these are years of experience, which are depicted in the quality of outcomes and individual attention to each orderer. We praise everyone, who cooperated with us - hence, our regular consumers procure the most helpful purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Armenia, Bulgaria, Congo, Sierra Leone, Switzerland, Eswatini, Burundi, South Korea, Mali, Dominica, Argentina, Lebanon, Malawi, Israel, Brazil, Suriname, Mongolia, Turkmenistan, Equatorial Guinea, Laos, Ghana, Jordan, Libya, Ukraine, Nicaragua, New Zealand, Mexico, Jamaica, Uganda, Mauritania, Cameroon, Egypt, Thailand, Uruguay, Kazakhstan, China, Rwanda, Macedonia, Slovakia, Lithuania, Iran. A well-elaborated logistics system and a partnership network assist us to conduct our units anywhere in the planet on-time without undermining product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the sphere of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are glad that customers choose FAMAGA again and again, and we are glad to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or write a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
I.D. Shaft Bore Shape | Type | Hub | Handwheel | Handle Mounting Hole Insert | Handle | Handle Thread | ||||
Stationary Handles | Folding Handles | Without Handle | Material | Surface Treatment | Material | Material | Material | Material | Surface Treatment | |
*1 No Hole | PHLN | PHLFN | - | EN-JL 1030 Equiv. | Black Oxide | Phenol | Brass | Phenol | EN 1.0711 Equiv. | Trivalent Chromate |
- | - | PHLN-R | Nylon 6 | EN 1.0715 Equiv., Trivalent Chromate | ||||||
H9 Hole + Tap | PHLM | PHLFM | - | Phenol | Brass | |||||
PHLSM | - | - | EN 1.4305 Equiv. | - | ||||||
H9 Hole + Keyway + Tap | PHLK | PHLFK | - | EN-JL 1030 Equiv. | Black Oxide | |||||
PHLSK | - | - | EN 1.4305 Equiv. | - | ||||||
Square Bore | PHLW | PHLFW | - | EN-JL 1030 Equiv. | Black Oxide | |||||
Slit | PHLP | - | - | EN 1.1191 Equiv. | Black Chromate | Polypropylene |
Part Number | - | d |
PHLN80 | ||
PHLM100 | - | 12 |
PHLP125 | - | 12 |
Part Number | H9 Hole + Tap | H9 Hole + Keyway + Tap | Square Bore | Slit | H | A | D1 | D2 | D3 | L | L1 | d1 | h1 | X | Y | R (Dia.) | d3 | M (Coarse) | M2 (Coarse) | P | PHLP (Reference Tightening Torque) | B | G | Mass (g) | ||||||||||
PHL? | PHLF? | PHL? | PHLF? | PHL? | PHLF? | |||||||||||||||||||||||||||||
Type | D | d Selection | M1 (Coarse) | d1 | b | t | W Selection | d2 | ||||||||||||||||||||||||||
No Hole PHLN PHLFN H9 Hole + Tap PHLM PHLFM PHLSM | H9 Hole + Keyway + Tap PHLK PHLFK, PHLSK Square Bore PHLW, PHLFW Slit PHLP | 80 | *10, | *12, | 14 | 5 | 10 | 3 | 1.4 | 10 | 10 | 32 | 13 | 20 | 28.5 | 30.2 | 25 | 25 | 23.3 | 9 | 9 | 7 | 8.5 | 4.5 | 8 | 4 | 26 | 3 | 20 | 19.6 | 40 | 55 | 135 | 177 |
100 | 10, | *12, | *15 | 12 | 4 | 1.8 | 12 14 | 12 | 36 | 25 | 35 | 37.1 | 28 | 28 | 10 | 9 | 10 | 5.5 | 5 | 37 | 5 | 200 | 242 | |||||||||||
125 | *12, | *16, | 18 | 40 | 17 | 30 | 40 | 30 | 29.45 | 50 | 19.7 | 55 | 81.5 | 330 | 410 | |||||||||||||||||||
140 | *15, | 18, | *20 | 6 | 15 | 5 | 2.3 | - | 41 | 18 | 44.9 | - | - | 31.1 | 11 | - | - | - | - | 10 | - | 55 | - | 23 | 22.6 | 67 | 104 | 410 | 565 | |||||
160 | 16, | 18, | 20 | 16 | 5 | 2.3 | - | 47 | 20 | 45.3 | - | 35 | - | 65 | 485 | 640 | ||||||||||||||||||
180 | 16, | 18, | 20 | 14 17 | 50 | 23 | 35 | 49.9 | - | - | 73 | 640 | 795 | |||||||||||||||||||||
200 | 16, | 18, | 20 | 54 | 50 | - | 40 | - | 80 | 24 | 75 | 780 | 935 | |||||||||||||||||||||
No Hole, Without Handle PHLN-R | 250 | - | - | - | - | - | - | - | 66 | 26 | - | 44 | - | 42 | - | - | - | - | - | - | - | 10 | - | - | - | - | - | - | - | 980 | - |