We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for MISUMI NPJS3-3, communicate with FAMAGA, the world's principle retailer of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are expressed in the quality of outputs and personalseparate attention to each consumer. We understand everyone, who collaborated with us - hence, our regular customers bring in the most helpful purchase terms and discounts on the industrial equipment market. At this time, there are more than 4500 such customers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA supplies all over the planet Germany, United Kingdom, San Marino, Gambia, Venezuela, The Gambia, Netherlands, Namibia, Albania, Lesotho, Sri Lanka, Bosnia and Herzegovina, Norway, Philippines, Czech Republic, United Arab Emirates, Madagascar, Colombia, Egypt, United States, Uruguay, Finland, Jamaica, Eritrea, Turkmenistan, Estonia, Haiti, Mexico, Kyrgyzstan, Yemen, Liechtenstein, Benin, Indonesia, Argentina, China, Cyprus, Azerbaijan, Costa Rica, Thailand, Djibouti, Syria, Luxembourg, Seychelles, Bulgaria, Mozambique, Togo, Poland, Libya, Serbia, Paraguay, Burkina Faso, Georgia. A advanced logistics series and a partnership network help us to ship our units anywhere in the earth on-time without damaging product quality.
A special source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are happy that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Load Category | Type | Body | Pin | Spring | Operating Temperature | ||||||
Standard | No Thread Locking Compound | Material | Hardness | Surface Treatment | Material | Hardness | Surface Treatment | Material | |||
Steel Nose | Ultra Light Load | PJS | PJS-N | EN 1.1191 Equiv. | 29~35HRC | Black Oxide | EN 1.1191 Equiv. | 57~63HRC (Carburized) | Trivalent Chromate | JIS-SWP-B | -30~80C |
Light Load | PJL | PJL-N | |||||||||
Heavy Load | PJH | PJH-N | Black Oxide | ||||||||
Extra Heavy Load | PJX | PJX-N | Nickel Plating | ||||||||
Plastic Tip | Ultra Light Load | NPJS | NPJS-N | Black Oxide | Polyacetal | - | - | ||||
Light Load | NPJL | NPJL-N | |||||||||
Heavy Load | NPJH | NPJH-N | |||||||||
Extra Heavy Load | NPJX | - | Nickel Plating |
Part Number |
NPJH3-1.5 PJS-N10-5 |
Part Number | d | ? | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | Unit Price | |||||||||
Type | M (Coarse) | S | Ultra Light / Light / Heavy Load | Extra Heavy Load | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | Ultra Light / Light / Heavy Load | Extra Heavy Load |
(Steel Tip) PJS (* only) PJL PJH PJX (* only) (Plastic Tip) NPJS (* only) NPJL (* only) NPJH (* only) NPJX (* only) | 3 | **1.5 | 1.1 | 10(15) | 10 | 15 | 0.9 | 0.05 | 0.32 | 0.49 | 1.0 | 0.78 | 2.9 | 2.2 | 4.5 | |||
**3 | 1.1 | 15(20) | 15 | 20 | 0.9 | 0.09 | 0.32 | 0.29 | 1.0 | 0.78 | 2.9 | 1.8 | 4.5 | |||||
4 | **2 | 1.6 | 15(24) | 15 | 24 | 1.3 | 0.23 | 0.65 | 1.0 | 2.0 | 2.9 | 8.8 | 5.2 | 13 | ||||
**4 | 1.6 | 24 | 24 | 24 | 1.3 | 0.24 | 0.65 | 0.59 | 2.0 | 2.0 | 8.8 | 5.2 | 13 | |||||
5 | **3 | 2.0 | 20(27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 2.0 | 9.8 | 4.9 | 19.6 | 9.1 | 24.5 | ||||
**5 | 2.0 | 27(39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 2.0 | 9.8 | 2.9 | 19.6 | 8.8 | 24.8 | |||||
6 | **3 | 2.5 | 25(30) | 25 | 30 | 2 | 0.85 | 3.2 | 5.9 | 9.8 | 7.8 | 29.4 | 14.2 | 39.5 | ||||
**5 | 2.5 | 30(36) | 30 | 36 | 2 | 0.85 | 3.2 | 2.0 | 9.8 | 4.9 | 29.4 | 14.1 | 39.4 | |||||
10 | 2.5 | 30 | 39 | - | 2 | - | - | 1.4 | 9.8 | 5.0 | 28.0 | - | - | - | ||||
8 | **3 | 3.1 | 25(27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 5.9 | 9.8 | 14.7 | 29.4 | 35.3 | 41.2 | ||||
**5 | 3.1 | 27(30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.8 | 7.8 | 29.4 | 14.7 | 41.2 | |||||
10 | 3.1 | 30 | 43 | - | 2.5 | - | - | 3.0 | 9.8 | 7.0 | 28.8 | - | - | - | ||||
10 | **5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 5.9 | 14.7 | 8.8 | 49.0 | 15.7 | 62.8 | ||||
**10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.7 | 7.8 | 49.0 | 12.7 | 62.8 | |||||
15 | 3.8 | 30 | 58 | - | 3 | - | - | 2.9 | 14.7 | 6.2 | 48.7 | - | - | - | ||||
12 | **5 | 5.5 | 30(35) | 30 | 43 | 4 | 1.5 | 4.7 | 5.9 | 14.7 | 18.6 | 49.0 | 37.2 | 98.1 | ||||
**10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.9 | 19.6 | 7.8 | 49.0 | 14.7 | 98.1 | |||||
**15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.9 | 19.6 | 4.9 | 49.0 | 14.9 | 98.1 | |||||
20 | 5.5 | 35 | 78 | - | 4 | - | - | 3.5 | 19.6 | 6.9 | 49.0 | - | - | - | ||||
16 | **10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 5.9 | 39.2 | 12.7 | 78.5 | 23.5 | 147.2 | ||||
**15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 3.9 | 39.2 | 12.7 | 78.5 | 21.6 | 147.2 | |||||
**20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 4.9 | 39.2 | 9.8 | 78.5 | 12.7 | 147.2 | |||||
* 30 | 8 | 35 | 125 | 125 | 5 | - | - | 2.9 | 39.2 | 6.9 | 78.5 | 19.6 | 147.2 | |||||
40 | 8 | 35 | 125 | - | 5 | 4.9 | 39.2 | 6.9 | 78.5 | - | - | - | ||||||
50 | 8 | 35 | 155 | 5 | 19.6 | 49.0 | 29.4 | 78.5 | ||||||||||
60 | 8 | 35 | 159 | 5 | 2.9 | 49.0 | 3.9 | 78.5 | ||||||||||
70 | 8 | 35 | 185 | 5 | 3.4 | 49.0 | 5.5 | 78.5 | ||||||||||
80 | 8 | 35 | 185 | 5 | 19.6 | 49.0 | 29.4 | 93.2 | ||||||||||
20 | * 15 | 10 | 45 | 60 | 80 | 6 | 12.7 | 78.5 | 24.5 | 147.1 | 12.7 | 245.3 | ||||||
20 | 10 | 45 | 72 | - | 6 | 11.7 | 78.5 | 22.6 | 147.1 | - | - | - | ||||||
30 | 10 | 45 | 96 | 6 | 11.7 | 78.5 | 22.6 | 147.1 | ||||||||||
40 | 10 | 45 | 120 | 6 | 11.7 | 78.5 | 22.6 | 147.1 | ||||||||||
24 | 7 | 10 | 45 | 60 | - | 10 | - | - | 19.6 | 98.1 | 44.1 | 196.1 | - | - | - | |||
* 15 | 10 | 45 | 60 | 84 | 10 | 19.6 | 98.1 | 47.1 | 215.7 | 24.5 | 314.0 | |||||||
20 | 10 | 45 | 75 | - | 10 | 17.7 | 98.1 | 44.1 | 215.7 | - | - | - | ||||||
30 | 10 | 45 | 100 | 10 | 17.7 | 98.1 | 44.1 | 215.7 | ||||||||||
40 | 10 | 45 | 124 | 10 | 17.7 | 98.1 | 44.1 | 215.7 | ||||||||||
30 | 15 | 14 | 45 | 66 | 14 | 27.5 | 117.7 | 44.1 | 274.6 | |||||||||
20 | 14 | 45 | 78 | 14 | 27.5 | 117.7 | 53.0 | 274.6 | ||||||||||
? dimensions with ( ) are applicable to the Extra Heavy Load Type. | 30 | 14 | 45 | 100 | 14 | 27.5 | 117.7 | 45.1 | 274.6 | |||||||||
40 | 14 | 45 | 123 | 14 | 27.5 | 117.7 | 47.1 | 274.6 |
Part Number | d | ? | L | B | Ultra Light Load | Light Load | Heavy Load | Extra Heavy Load | Unit Price | |||||||||
Type | M (Coarse) | S | Ultra Light / Light / Heavy Load | Extra Heavy Load | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | min. | N Load | max. | Ultra Light / Light / Heavy Load | Extra Heavy Load |
(Steel Tip) PJS-N PJL-N PJH-N PJX-N (Plastic Tip) NPJS-N NPJL-N NPJH-N | 5 | 3 | 2.0 | 20(27) | 20 | 27 | 1.5 | 0.74 | 2.95 | 2.0 | 9.8 | 4.9 | 19.6 | 9.1 | 24.5 | |||
5 | 2.0 | 27(39) | 27 | 39 | 1.5 | 0.72 | 2.95 | 2.0 | 9.8 | 2.9 | 19.6 | 8.8 | 24.8 | |||||
6 | 3 | 2.5 | 25(30) | 25 | 30 | 2 | 0.85 | 3.2 | 5.9 | 9.8 | 7.8 | 29.4 | 14.2 | 39.5 | ||||
5 | 2.5 | 30(36) | 30 | 36 | 2 | 0.85 | 3.2 | 2.0 | 9.8 | 4.9 | 29.4 | 14.1 | 39.4 | |||||
8 | 3 | 3.1 | 25(27) | 25 | 27 | 2.5 | 0.9 | 3.3 | 5.9 | 9.8 | 14.7 | 29.4 | 35.3 | 41.2 | ||||
5 | 3.1 | 27(30) | 27 | 35 | 2.5 | 0.9 | 3.3 | 2.9 | 9.8 | 7.8 | 29.4 | 14.7 | 41.2 | |||||
10 | 5 | 3.8 | 30 | 30 | 35 | 3 | 1.9 | 4.7 | 5.9 | 14.7 | 8.8 | 49.0 | 15.7 | 62.8 | ||||
10 | 3.8 | 30 | 43 | 53 | 3 | 1.7 | 4.7 | 2.9 | 14.7 | 7.8 | 49.0 | 12.7 | 62.8 | |||||
12 | 5 | 5.5 | 30(35) | 30 | 43 | 4 | 1.5 | 4.7 | 5.9 | 14.7 | 18.6 | 49.0 | 37.2 | 98.1 | ||||
10 | 5.5 | 35 | 43 | 58 | 4 | 1.3 | 5.9 | 2.9 | 19.6 | 7.8 | 49.0 | 14.7 | 98.1 | |||||
15 | 5.5 | 35 | 51 | 78 | 4 | 1.6 | 5.9 | 2.9 | 19.6 | 4.9 | 49.0 | 14.9 | 98.1 | |||||
16 | 10 | 8 | 35 | 60 | 60 | 5 | 1.7 | 12.8 | 5.9 | 39.2 | 12.7 | 78.5 | 23.5 | 147.2 | ||||
? dimensions with ( ) are applicable to the Extra Heavy Load Type. | 15 | 8 | 35 | 60 | 70 | 5 | 1.7 | 12.8 | 3.9 | 39.2 | 12.7 | 78.5 | 21.6 | 147.2 | ||||
20 | 8 | 35 | 85 | 90 | 5 | 1.7 | 12.8 | 4.9 | 39.2 | 9.8 | 78.5 | 12.7 | 147.2 |