We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MJPQTA20-[22-30/0.01]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are questing MISUMI MJPQTA20-[22-30/0.01], communicate with FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of products and individual attention to each orderer. We praise everyone, who conspired with us - so, our regular purchasers receive the most favorable purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Oman, Guinea-Bissau, Ukraine, Sri Lanka, Benin, Bolivia, Bahamas, Rwanda, Seychelles, Liechtenstein, Netherlands, Serbia, Iceland, Estonia, Russia, Austria, Finland, Tajikistan, Belarus, Australia, United Arab Emirates, Romania, East Timor, Chad, Brunei, Cape Verde, Belize, Uganda, Syria, Fiji, Jamaica, Panama, Kenya, Switzerland, Haiti, Poland, Philippines, Samoa, Mongolia, Mauritius, Tanzania, Malaysia, Paraguay, Kuwait, Guatemala. A well-elaborated logistics bond and a partnership network assist us to dispatch our goods anywhere in the planet promptly without damaging product quality.
A special source of repute for FAMAGA is its team members, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this bulk is amounting every day. We are proud that users choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or make a request, get in touch with us or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | ||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | ?6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | ?8 | M3 | ?147 | ?5 | ||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | ?676 | ?8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | ?6 | M2 | - | 3 | 2.2 |
6 | ?6.50~10.00 | ?8 | M3 | ?147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | ?9.00~13.00 | 15 | M5 | ?676 | 8 | 3.5 | |||
8T | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | ?676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5(9)~10 | 2.0~10.0 | M2 | - | ?3 | 2.2 |
?6 | ?6.50~10.00 | ?6(9)~12 | 2.0~12.0 | M3 | ?147 | ?5 | 3 | |||
?6T | M2.6 | - | ?4 | |||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8(12)~16 | 2.0~15.0 | M5 | ?676 | ?8 | 3.5 | ||
?8T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | ?676 | ?8 | 4 | |||
10T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 5 | ||
12T | ?8(12)~18 | M4 | ?333 | ?6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | ?8(14)~20 | M6 | 1156 | ?9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | ?9 |