We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MGJPQSPD20-[1-2/0.01]
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
If you are questing MISUMI MGJPQSPD20-[1-2/0.01], catch up with FAMAGA, the world's top supplier of industrialized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of merchandises and individual attention to each purchaser. We admire everyone, who cooperated with us - hence, our regular clients procure the most convenient purchase terms and discounts on the industrial equipment market. At this time, there are more than 3500 such consumers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Saudi Arabia, France, Luxembourg, Dominican Republic, Burma, Kyrgyzstan, Turkey, Mali, Uzbekistan, Tunisia, Suriname, Bangladesh, Paraguay, Afghanistan, Tanzania, Norway, Chile, Uruguay, Sierra Leone, Macedonia, Monaco, Chad, Bulgaria, Nigeria, United States, Bolivia, Mexico, Niger, Argentina, Brazil, South Korea, Ghana, Liechtenstein, Azerbaijan, Algeria, Senegal, Pakistan, Iraq, China, Lithuania, Kiribati, Central African Republic, Denmark, North Korea, Austria, New Zealand, Burkina Faso. A well-shaped logistics network and a partnership network assist us to send our elements anywhere in the planet immediately without damaging product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as keep on top of it.
To get some advice or book, contact us or write to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPQ | SA | 4 | - | 2.01 | ||||||
FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | ? | |||||||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
m6 | p6 | |||||||||||||
JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
5 | 2 | 3 | 4 | 10 | 5 | |||||||||
6 | 2 | 3 | 4 | 5 |
Part Number | P 0.01mm Increment | L | B | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D?5 and P?5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D?4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
6 | 2.00~6.00 | 1.5 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
13 | 6.00~13.00 | 22 | 3 | |||||||
16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D?5 and P?5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D?4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |