We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MGJPQPD5-[5.5-8/0.01]
Description
Spherical Large Head/Standard/P Configurable
Stock availability:
On request
If you are seeking MISUMI MGJPQPD5-[5.5-8/0.01], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of merchandises and private attention to each user. We value everyone, who engaged with us - therefore, our regular consumers get the most beneficial purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly make new agreements. More than 650 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Croatia, Nicaragua, Israel, Uzbekistan, Angola, Sweden, Sri Lanka, Afghanistan, Panama, Estonia, Colombia, Singapore, East Timor, Equatorial Guinea, Botswana, Benin, Kuwait, Netherlands, Guatemala, Tajikistan, Burkina Faso, Montenegro, Guyana, Moldova, Georgia, Sudan, Yemen, Madagascar, Brunei, New Zealand, Haiti, Belize, Vietnam, Switzerland, Andorra, Fiji, Austria, United Arab Emirates, Slovakia, Comoros, Egypt, Samoa, Peru, Mauritius, Malaysia, Australia. A well-developed logistics series and a partnership network help us to ship our products anywhere in the earth with no delay without compromising product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of manufacturing equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write to the online chat on our official website. You can also send a list of the needful equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | B (m6) PB (p6) | JPQ | A (m6) PA (p6) D (m6) PD (p6) | FPQ | A (m6) PA (p6) D (m6) PD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | HJPQ (Round only) | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQ | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQ | MCFPQ |
Part Number | P | L | B | |||||||
- | - | - | ||||||||
Type | D Tol. Shape | D | ||||||||
JPQ FPQ MFPQ | A A PA | 4 4 12 | - - - | 5.00 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 |
Part Number | P Selection | L | B | C | ? | |||||||||||||||
Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
m6 | p6 | |||||||||||||||||||
JPQ SJPQ CJPQ | B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 |
Part Number | P 0.01mm Increment | L | B | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ HJPQ CJPQ (Buff Finished) MJPQ MCJPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 3 | 3 | 0.1 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | |||||||
6 | 6.50~10.00 | 8 | 3.0 | |||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4.0 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5.0 | ||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | ||||||
16 | 17.00~25.00 | 3 | 7.0 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9.0 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D Tol. | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ Applicable when D≥5. | A (m6) PA (p6) D (m6) PD (p6) Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.50 | 2, 3 | 2.0~5.0 | 0.1 | 0 | - |
2 | 2.50~4.00 | 2~6 | 2.0~10.0 | 0.5 | 1.2 | |||||
3 | 3.50~6.00 | 3~6 | 2.0~10.0 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 4~8 | 2.0~10.0 | 1 | 1.8 | |||
5 | 5.50~8.00 | 5~10 | 2.0~10.0 | 2.2 | ||||||
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 8~16 | 2.0~15.0 | 1.5 | 3.5 | |||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 12~24 | 3.0~20.0 | 5.0 | ||||
13 | 14.00~18.00 | 13~26 | 5.0~20.0 | 2 | 5.5 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 20~40 | 5.0~20.0 | 9.0 |