We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MGFPQTA10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are inspecting MISUMI MGFPQTA10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each client. We cherish everyone, who conspired with us - so, our regular clients obtain the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such customers, and we constantly make new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Afghanistan, Egypt, Brazil, Poland, Myanmar, Monaco, Brunei, Syria, Luxembourg, Finland, Guyana, Slovenia, Lebanon, Djibouti, Azerbaijan, Malaysia, Netherlands, Albania, Antigua and Barbuda, South Sudan, Qatar, Guatemala, The Bahamas, Seychelles, Peru, Eswatini, Estonia, Israel, Swaziland, Kuwait, Montenegro, Mauritania, Yemen, Philippines, Switzerland, Malta, Tajikistan, Costa Rica, Slovakia, Latvia, Botswana. A advanced logistics series and a partnership network assist us to conduct our products anywhere in the planet on-time without discrediting product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All items from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this amount is amounting every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as to stay on the top.
To request or book, call us by phone or write a message to the online chat on our site. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | ||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | ?6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | ?8 | M3 | ?147 | ?5 | ||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | ?676 | ?8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | ?6 | M2 | - | 3 | 2.2 |
6 | ?6.50~10.00 | ?8 | M3 | ?147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | ?9.00~13.00 | 15 | M5 | ?676 | 8 | 3.5 | |||
8T | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | ?676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5(9)~10 | 2.0~10.0 | M2 | - | ?3 | 2.2 |
?6 | ?6.50~10.00 | ?6(9)~12 | 2.0~12.0 | M3 | ?147 | ?5 | 3 | |||
?6T | M2.6 | - | ?4 | |||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8(12)~16 | 2.0~15.0 | M5 | ?676 | ?8 | 3.5 | ||
?8T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | ?676 | ?8 | 4 | |||
10T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 5 | ||
12T | ?8(12)~18 | M4 | ?333 | ?6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | ?8(14)~20 | M6 | 1156 | ?9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | ?9 |