We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MFPQTA10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
Description
Spherical Large Head/Tapped/P Configurable
Stock availability:
On request
If you are pursuing MISUMI MFPQTA10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1], call FAMAGA, the world's central company of streamlined equipment. Our company has lasted for more than ten years - these are ages of experience, which are illustrated in the quality of products and special attention to each consumer. We value everyone, who engaged with us - hence, our regular consumers accept the most acceptable purchase terms and discounts on the factory-made equipment market. At present, there are more than 4500 such purchasers, and we constantly form new agreements. More than 650 contracts are concluded per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Swaziland, Eritrea, Saudi Arabia, Tanzania, Laos, Chad, Mauritius, Palestine, Egypt, Denmark, Benin, Burundi, Slovakia, Tajikistan, Romania, Grenada, Tonga, Montenegro, Lithuania, Iceland, Guatemala, Cape Verde, Liberia, Yemen, Rwanda, Libya, Brunei, Uganda, Nicaragua, Cameroon, Eswatini, Norway, Cyprus, Ecuador, Madagascar, Poland, Bulgaria, Czech Republic, Ukraine, Chile, Niger, Malaysia, Armenia, Tunisia. A well-built logistics network and a partnership network assist us to dispatch our products anywhere in the earth on-time without undermining product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To ask a question or place an order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | Shape Code | Type | Shape Code | Type | Shape Code | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQT | BB (Round) | JPQT | A (Round) D (Diamond) | FPQT | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQT | GFPQT | ||||
EN 1.4301 Equiv.* | - | - | SJPQT | SJPQT | SFPQT | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQT | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQT | CJPQT | CFPQT | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQT | MFPQT | ||||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQT | ||||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCJPQT | MCFPQT |
Part Number | - | P | - | L | - | B |
JPQTA6 MFPQTA6 | - - | 10.0 P10.00 | - | L10 | - | B5.0 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N cm | ? | ||||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||||
JPQT SJPQT CJPQT | BB (Round) | ?6 | -0.004 -0.012 | 7 | 8 | 9 | 10 | 10 | ?8 | M3 | ?147 | ?5 | ||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 15 | M5 | ?676 | ?8 | ||||||||||||
10 | 11 | 12 | 13 | 15 | 10 | |||||||||||||||||
12 | -0.006 -0.017 | 15 | 16 | |||||||||||||||||||
16 | 18 | 19 | 20 | 24 | 25 | 22 | M8 | 2803 | 12 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQT GJPQT SJPQT CJPQT (Buff Finished) MJPQT MCJPQT | A (Round) D (Diamond) | 5 | -0.004 -0.012 | 5.50~8.00 | 10 | ?6 | M2 | - | 3 | 2.2 |
6 | ?6.50~10.00 | ?8 | M3 | ?147 | 5 | 3 | ||||
6T | M2.6 | - | 4 | |||||||
8 | -0.005 -0.014 | ?9.00~13.00 | 15 | M5 | ?676 | 8 | 3.5 | |||
8T | M4 | ?333 | 6 | |||||||
10 | 11.00~15.00 | 10 | M5 | ?676 | 8 | 4 | ||||
12 | -0.006 -0.017 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | M8 | 2803 | 10 | 5.5 | ||||
16 | 17.00~25.00 | 12 | 7 | |||||||
20 | -0.007 -0.020 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque Ncm | ? | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQT GFPQT SFPQT HFPQT CFPQT (Buff Finished) MFPQT MGFPQT MCFPQT | A (Round) D (Diamond) | ?5 | -0.004 -0.012 | 5.50~8.00 | ?5(9)~10 | 2.0~10.0 | M2 | - | ?3 | 2.2 |
?6 | ?6.50~10.00 | ?6(9)~12 | 2.0~12.0 | M3 | ?147 | ?5 | 3 | |||
?6T | M2.6 | - | ?4 | |||||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?8(12)~16 | 2.0~15.0 | M5 | ?676 | ?8 | 3.5 | ||
?8T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
10 | 11.00~15.00 | 10(12)~20 | 3.0~20.0 | M5 | ?676 | ?8 | 4 | |||
10T | ?6(12)~16 | M4 | ?333 | ?6 | ||||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~20.0 | M5 | ?676 | ?8 | 5 | ||
12T | ?8(12)~18 | M4 | ?333 | ?6 | ||||||
13 | 14.00~18.00 | 13(14)~26 | 5.0~20.0 | M8 | 2803 | 10 | 5.5 | |||
13T | ?8(14)~20 | M6 | 1156 | ?9 | ||||||
16 | 17.00~25.00 | 16~32 | 5.0~20.0 | M8 | 2803 | 12 | 7 | |||
16T | 10(14)~24 | M6 | 1156 | ?9 | ||||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~20.0 | M8 | 2803 | 12 | 9 | ||
20T | 12(18)~30 | M6 | 1156 | ?9 |