We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MCJPRSPB6-[3-6/1]
Description
Small Head/Round Tapered/Standard
Stock availability:
On request
If you are looking for MISUMI MCJPRSPB6-[3-6/1], reach FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are outlined in the quality of merchandises and particular attention to each orderer. We value everyone, who joined with us - therefore, our regular buyers accept the most desirable purchase conditions and discounts on the industrial equipment market. At present, there are more than 4000 such consumers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Sweden, Croatia, Equatorial Guinea, Dominican Republic, Chile, Brunei, Kiribati, Burundi, Congo, Canada, Benin, Bosnia and Herzegovina, Bhutan, Ghana, South Sudan, Sierra Leone, The Bahamas, Slovakia, Estonia, Singapore, Madagascar, Netherlands, Panama, Laos, Kenya, Tajikistan, Indonesia, Central African Republic, Nicaragua, Cape Verde, Pakistan, Ireland, Argentina, Luxembourg, Georgia, Comoros, Angola, Vietnam, Swaziland, Tonga, Qatar, Senegal, Zimbabwe, Yemen. A well-built logistics series and a partnership network help us to dispatch our elements anywhere in the planet with no delay without disreputing product quality.
A specific source of honor for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | ||
Press Fit (m6) | Press Fit (p6) | Tapped | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPRSB | JPRSPB | JPRSTB | |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GJPRSB | GJPRSPB | - | |
EN 1.4301 Equiv. | - | - | SJPRSB | SJPRSPB | SJPRSTB | |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPRSB | CJPRSPB | - |
Part Number | - | P | ||
Type | D | |||
JPRSB | 10 | - | 6 |
Part Number | P Selection | L | B | C | ? | E | Unit Price | |||||||||||||||||||
JPRSB JPRSPB | GJPRSB GJPRSPB | SJPRSB SJPRSPB | CJPRSB CJPRSPB | |||||||||||||||||||||||
Type | D | D dim. Tolerance | ||||||||||||||||||||||||
m6 | p6 | |||||||||||||||||||||||||
m6 JPRSB GJPRSB SJPRSB CJPRSB | p6 JPRSPB GJPRSPB SJPRSPB CJPRSPB | ?3 | 0.01? | 0 | ?2 | ?3 | ?5 | ?3 | 0.5 | 1 | 3 | |||||||||||||||
?4 | 0.02 | 0 | ?2 | ?3 | ?4 | 1 | ||||||||||||||||||||
?5 | ?2 | ?3 | ?4 | ?5 | 10 | ?5 | ||||||||||||||||||||
?6 | ?3 | ?4 | ?5 | ?6 | 4 | |||||||||||||||||||||
?8 | 0.02 | 0 | ?4 | ?5 | ?6 | ?8 | 15 | ?6 | 1.5 | 5 | ||||||||||||||||
10 | ?6 | ?8 | 10 | ?8 | 2 | |||||||||||||||||||||
12 | 0.03 | 0 | ?8 | 10 | 12 | 6 | ||||||||||||||||||||
13 | 12 | 13 | 22 | 2 | ||||||||||||||||||||||
16 | 12 | 13 | 14 | 15 | 16 | 10 | 3 | 7 | ||||||||||||||||||
20 | 0.03 | 0.1 | 15 | 16 | 20 | 30 |
Part Number | P Selection | L | B | E | M (Coarse) | * Tightening Torque N•cm | ? | Unit Price | |||||||||||||||
Type | D | D dim. Tolerance g6 | JPRSTB | SJPRSTB | |||||||||||||||||||
JPRSTB SJPRSTB | ?6 | -0.016 | ?4 | ?5 | ?6 | 10 | 5 | 5 | M3 | ?147 | ?5 | ||||||||||||
?6T | ?4 | ?5 | ?6 | M2.6 | - | ?4 | |||||||||||||||||
?8 | -0.019 | ?6 | ?8 | 15 | 6 | M4 | ?333 | ?6 | |||||||||||||||
?8T | ?6 | ?8 | M3 | ?147 | ?5 | ||||||||||||||||||
10 | ?8 | 10 | 8 | M5 | ?676 | ?8 | |||||||||||||||||
12 | -0.023 | ?8 | 10 | 12 | 6 | ||||||||||||||||||
13 | 12 | 13 | 22 | M8 | 2803 | 12 | |||||||||||||||||
16 | 12 | 13 | 14 | 15 | 16 | 10 | 7 | ||||||||||||||||
20 | -0.027 | 15 | 16 | 20 | 30 |