We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MCJPQSD10-[1-2/0.01]
Description
Spherical Small Head/Standard/P Configurable
Stock availability:
On request
If you are looking for MISUMI MCJPQSD10-[1-2/0.01], communicate with FAMAGA, the world's dominant provider of mechanized equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of goods and personalseparate attention to each user. We esteem everyone, who collaborated with us - so, our regular customers accept the most beneficial purchase forms and discounts on the machine made streamlined equipment market. At present, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Honduras, Kiribati, Morocco, Finland, Japan, Bosnia and Herzegovina, Eritrea, Bulgaria, Lithuania, Liberia, Netherlands, Samoa, Vietnam, Philippines, Latvia, Botswana, Seychelles, Oman, Ecuador, Mauritania, Kenya, South Korea, Angola, Syria, Guyana, Algeria, Burkina Faso, Togo, Macedonia, Ireland, Mexico, Nicaragua, Cameroon, Cyprus, Qatar, El Salvador, Swaziland, Serbia, Brunei, Mauritius, Uruguay, Sweden, Guatemala, Indonesia, Slovakia. A well-built logistics network and a partnership network help us to dispatch our elements anywhere in the planet with no delay without discrediting product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or make a request, contact us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQ | SB (m6) SPB (p6) | JPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | FPQ | SA (m6) SPA (p6) SD (m6) SPD (p6) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQ (Round only) | GFPQ | ||||
EN 1.4301 Equiv.* | - | - | SJPQ | SJPQ | SFPQ | ||||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQ | ||||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | - | CJPQ | CFPQ | ||||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | MJPQ | MFPQ |
Part Number | - | P | - | L | - | B | ||||
Type | Shape | D | ||||||||
JPQ | SA | 4 | - | 2.01 | ||||||
FPQ | SA | 4 | - | P2.01 | - | L6 | - | B5.5 |
Part Number | P Selection | L | B | C | ? | |||||||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||||||
m6 | p6 | |||||||||||||
JPQ SJPQ | SB (m6) SPB (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1 | 1.5 | 4 | 2 | 0.3 | 0 | ||||
3 | 2 | 5 | 3 | 0.5 | 1 | |||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 1 | |||||||||
5 | 2 | 3 | 4 | 10 | 5 | |||||||||
6 | 2 | 3 | 4 | 5 |
Part Number | P 0.01mm Increment | L | B | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
JPQ GJPQ SJPQ CJPQ (Buff Finished) MJPQ Applicable when D?5 and P?5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D?4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 4 | 2 | 0.3 | 0 | - |
3 | 1.00~3.00 | 5 | 3 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 1 | 1.0 | |||||
5 | 2.00~5.00 | 10 | 5 | 1.2 | ||||||
6 | 2.00~6.00 | 1.5 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 15 | 6 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 8 | 2 | 2.2 | ||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 2.5 | ||||||
13 | 6.00~13.00 | 22 | 3 | |||||||
16 | 10.00~16.00 | 10 | 3 | 4 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 30 | 5 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ? | (W) | ||||
Type | D Tolerance and Shape | D | D dim. Tolerance | |||||||
m6 | p6 | |||||||||
FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ Applicable when D?5 and P?5. | SA (m6) SPA (p6) SD (m6) SPD (p6) Applicable when D?4. | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.00~2.00 | 2~4 | 2.0~10.0 | 0.3 | 0 | - |
3 | 1.00~3.00 | 3~6 | 2.0~10.0 | 0.5 | 1 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 2.00~4.00 | 4~8 | 2.0~10.0 | 1 | 1.0 | |||
5 | 2.00~5.00 | 5~10 | 2.0~10.0 | 1.2 | ||||||
6 | 2.00~6.00 | 6~12 | 2.0~12.0 | 1.5 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~16 | 2.0~15.0 | 1.5 | 2 | 1.8 | ||
10 | 3.00~10.00 | 10~20 | 3.0~20.0 | 2 | 2.2 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 3.0~20.0 | 2.5 | ||||
13 | 6.00~13.00 | 13~26 | 5.0~20.0 | 3 | ||||||
16 | 10.00~16.00 | 16~32 | 5.0~20.0 | 3 | 4 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 5.0~20.0 | 5 |