We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
MCJPQNA5-[5.5-8/0.01]
Description
Spherical Large Head/Threaded/P Configurable
Stock availability:
On request
If you are seeking MISUMI MCJPQNA5-[5.5-8/0.01], reach FAMAGA, the world's primary vendor of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each orderer. We esteem everyone, who collaborated with us - therefore, our regular consumers procure the most attractive purchase conditions and discounts on the industrial equipment market. At present, there are more than 4 thousand such purchasers, and we constantly form new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Chile, Congo, Papua New Guinea, Mexico, Monaco, Italy, Eritrea, Austria, Denmark, Afghanistan, United States, Peru, Zimbabwe, Madagascar, East Timor, Macedonia, Nepal, Brazil, Sweden, Cape Verde, Russia, Vietnam, Jamaica, Suriname, Egypt, Slovakia, Yemen, Costa Rica, Switzerland, Mongolia, Pakistan, Samoa, China, Burundi, Mozambique, Belize, United Arab Emirates, Malaysia, Qatar, Cyprus, Swaziland, The Gambia, Iran. A well-developed logistics network and a partnership network cheer us to conduct our items anywhere in the earth immediately without compromising product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is rising every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To inquire or order, call us by phone or send a message to the online chat on our official website. You can also send a list of the needful equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material No. | Material | Surface Treatment | Hardness | Type | Shape Code | ||||
P Selectable | P Configurable | P, L, B Configurable | P, L, B, ML Configurable | P Selectable | Except P Selectable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPQN | JPQN | FPQN | FPQNL | BB (Round) | A (Round) D (Diamond) | |
EN 1.2510 Equiv. | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC | - | GJPQN | GFPQN | GFPQNL | |||
EN 1.4301 Equiv.* | - | - | SJPQN | SJPQN | SFPQN | SFPQNL | |||
EN 1.4301 Equiv. | Hard Chrome Plating | - | - | - | HFPQN (Round only) | - | |||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPQN | - | CFPQN | CFPQNL | |||
EN 1.2510 Equiv. | Buffing | Treated Hardness: 60 ~ 63HRC | - | - | MFPQN | - | |||
EN 1.2510 Equiv. | Hard Chrome Plating + Buffed | Treated Hardness: 50 ~ 55HRC | - | - | MGFPQN | MGFPQNL | |||
EN 1.4125 Equiv. | Buffing | Treated Hardness: 50 ~ 55HRC | - | - | MCFPQN | MCFPQNL |
Part Number | - | P | - | L | - | B | - | ML |
JPQNBB3 FPQNA16 SFPQNLA10 | - - - | 5 P18.00 P11.97 | - - | L12 L5 | - - | B7.5 B5.0 | - | ML12 |
Part Number | P Selection | L | B | M (Coarse) | * Tightening Torque N•cm | ML | ||||||||||||||
Type | Shape | D | D dim. Tolerance g6 | |||||||||||||||||
JPQN SJPQN CJPQN | BB (Round) | ?3 | -0.002 -0.008 | 4 | 5 | 6 | 2 | ?5 | M3 | ?147 | ?4.5 | |||||||||
?4 | -0.004 -0.012 | 5 | 6 | 7 | ?6 | M4 | ?333 | ?6 | ||||||||||||
?5 | 6 | 7 | 8 | 3 | M5 | ?676 | ?7.5 | |||||||||||||
?6 | 7 | 8 | 9 | 10 | ?8 | M6 | 1156 | ?9 | ||||||||||||
?8 | -0.005 -0.014 | 9 | 10 | 11 | 12 | 13 | 5 | M8 | 2803 | 12 | ||||||||||
10 | 11 | 12 | 13 | 15 | 10 | M10 | 5557 | 15 | ||||||||||||
12 | -0.006 -0.017 | 15 | 16 | 8 | M12 | 9702 | 18 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
JPQN GJPQN SJPQN | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | ?2 | ?5 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | ?6 | M4 | 333 | ?6 | 1.8 | |||
?5 | 5.50~8.00 | ?3 | M5 | 676 | ?7.5 | 2.2 | ||||
?6 | ?6.50~10.00 | ?8 | M6 | ?1156 | ?9 | 3 | ||||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5 | M8 | ?2803 | 12 | 3.5 | |||
10 | 11.00~15.00 | 10 | M10 | ?5557 | 15 | 4 | ||||
12 | -0.006 -0.017 | 13.00~18.00 | ?8 | M12 | ?9702 | 18 | 5 | |||
16 | 17.00~25.00 | M16 | 24108 | 24 | 7 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 10 | 15 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | * Tightening Torque N•cm | ML | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQN GFPQN SFPQN HFPQN CFPQN (Buff Finished) MFPQN MGFPQN MCFPQN Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | M3 | 147 | ?4.5 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | M4 | 333 | ?6 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | M5 | 676 | ?7.5 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | M6 | ?1156 | ?9 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | M8 | ?2803 | 12 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | M10 | ?5557 | 15 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | M12 | ?9702 | 18 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | M16 | 24108 | 24 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | M20 | 46942 | 30 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ML 1mm Increment | M (Coarse) | * Tightening Torque N•cm | (W) | |||
Type | Shape | D | D dim. Tolerance g6 | |||||||
FPQNL GFPQNL SFPQNL CFPQNL (Buff Finished) MGFPQNL MCFPQNL Applicable when D≥5. | A (Round) D (Diamond) | ?3 | -0.002 -0.008 | 3.50~6.00 | 2~6 | 2.0~10.0 | 3~9 | M3 | 147 | 1.5 |
?4 | -0.004 -0.012 | 4.50~7.00 | 2~8 | 2.0~10.0 | ?4~12 | M4 | 333 | 1.8 | ||
?5 | 5.50~8.00 | ?3~10 | 2.0~10.0 | ?5~15 | M5 | 676 | 2.2 | |||
?6 | ?6.50~10.00 | ?3~10 | 2.0~12.0 | ?6~18 | M6 | ?1156 | 3 | |||
?8 | -0.005 -0.014 | ?9.00~13.00 | ?5~10 | 2.0~15.0 | ?8~24 | M8 | ?2803 | 3.5 | ||
10 | 11.00~15.00 | ?5~15 | 3.0~20.0 | 10~30 | M10 | ?5557 | 4 | |||
12 | -0.006 -0.017 | 13.00~18.00 | ?8~15 | 3.0~20.0 | 12~30 | M12 | ?9702 | 5 | ||
16 | 17.00~25.00 | ?8~20 | 5.0~20.0 | 16~40 | M16 | 24108 | 7 | |||
20 | -0.007 -0.02 | 22.00~30.00 | 10~20 | 5.0~20.0 | 20~40 | M20 | 46942 | 9 |