We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
SHSTAH16-[15-40/0.1]
Description
Shaft Supports/T-Shaped/Slit Type
Stock availability:
On request
If you are pursuing MISUMI SHSTAH16-[15-40/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each customer. We value everyone, who worked with us - so, our regular customers pick up the most favorable purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4500 such buyers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA supplies all over the world Germany, United Kingdom, Zimbabwe, Cape Verde, The Bahamas, Djibouti, Guyana, Croatia, Algeria, Slovenia, Guatemala, Ghana, Malaysia, El Salvador, Netherlands, Oman, Tonga, Paraguay, North Korea, Syria, Senegal, Dominica, Tunisia, Seychelles, Ukraine, Fiji, Tanzania, Botswana, Brunei, Afghanistan, Sierra Leone, Cyprus, Armenia, Serbia, Togo, Russia, Burkina Faso, Mauritius, Angola, Sweden, Finland, South Korea, Greece, Morocco, Nepal. A well-shaped logistics chains and a partnership network assist us to conduct our elements anywhere in the planet with no delay without disreputing product quality.
A specific source of repute for FAMAGA is its employees, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are glad that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as keep on top of it.
To inquire or book, get in touch with us or write to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
W/o Dowel Hole | With Dowel Hole | Material | Surface Treatment | Accessory | |
Height H Selectable | Height H Configurable | Height H Selectable | |||
SHSTB | SHSTBH | SHSTBK | EN 1.1191 Equiv. | Black Oxide | Hex Socket Head Cap Screw 1 pc. |
SHSTM | SHSTMH | SHSTMK | Electroless Nickel Plating | Hex Socket Head Cap Screw 1 pc. (Stainless Steel) | |
SHSTS | SHSTSH | SHSTSK | EN 1.4301 Equiv. | - | |
SHSTA | SHSTAH | - | Aluminum Alloy 6000 series | Clear Anodize | |
SHSTD | SHSTDH | - | Black Anodize | Hex Socket Head Cap Screw 1 pc. |
Part Number | - | H | |
SHSTM8 SHSTMH8 SHSTMN20 | - - - | 25 25.6 30 |
Part Number | H | L | H1 | T | S | W | L1 | d | E | Tightening Screw M | d2 | d1 | C | Q | 1 | Unit Price | |||||||||||||||
W/o Dowel Hole | With Dowel Hole | ||||||||||||||||||||||||||||||
Type | D | Height H Selectable Type | Height H Configurable Type 0.1mm Increment | Height H Selectable Type | Height H Configurable Type | Height H Selectable Type | |||||||||||||||||||||||||
SHSTB | SHSTM | SHSTS | SHSTA | SHSTD | SHSTBH | SHSTMH | SHSTSH | SHSTAH | SHSTDH | SHSTBK | SHSTMK | SHSTSK | |||||||||||||||||||
W/o Dowel Hole Height H Selectable SHSTB SHSTM SHSTS SHSTA SHSTD Height H Configurable SHSTBH SHSTMH SHSTSH SHSTAH SHSTDH With Dowel Hole SHSTBK SHSTMK SHSTSK (8≤D≤50) | 3 | 10 15 20 | 10.0~20.0 | 26 | H+11 | 8 | 4 | 10 | 18 | 3.5 | 7 | M3 Through | 3.5 | 6.5 | 3.5 | 1.5 | - | - | - | - | - | ||||||||||
4 | - | - | - | ||||||||||||||||||||||||||||
5 | 10 15 20 25 | 10.0~25.0 | H+12 | 8 | - | - | - | ||||||||||||||||||||||||
6 | - | - | - | ||||||||||||||||||||||||||||
8 | (10) 15 20 25 30 40 | 10.0~40.0 | 42 | H+16 | 10 | 6 | 18 | 30 | 4.5 | 11 | M4 Through | 4.5 | 8 | 4.5 | 2 | 4 | 5 | ||||||||||||||
10 | (10) 15 20 25 30 | 10.0~30.0 | |||||||||||||||||||||||||||||
12 | H+18 | 13 | |||||||||||||||||||||||||||||
13 | (15) 20 25 30 | 15.0~30.0 | |||||||||||||||||||||||||||||
15 | 54 | H+20 | 30 | 42 | 15 | M4 Depth 8 | |||||||||||||||||||||||||
16 | (15) 20 25 30 40 | 15.0~40.0 | |||||||||||||||||||||||||||||
18 | 20 25 30 40 50 60 | 20.0~60.0 | 67 | H+26 | 16 | 8 | 35 | 50 | 6.6 | 18 | M6 Through | 6.6 | 11 | 6.5 | 5 | 7 | |||||||||||||||
20 | |||||||||||||||||||||||||||||||
25 | (20) 25 30 40 50 60 | 20.0~60.0 | H+28 | 21 | |||||||||||||||||||||||||||
30 | 25 30 40 50 60 | 25.0~60.0 | 85 | H+33 | 20 | 10 | 45 | 65 | 9 | 24 | M8 Depth 16 | 9 | 14 | 9 | 3 | ||||||||||||||||
35 | (25) 30 40 50 60 | 25.0~60.0 | H+36 | 27 | |||||||||||||||||||||||||||
40 | 30 40 50 60 80 | 30.0~80.0 | 100 | H+38 | 60 | 80 | 29 | ||||||||||||||||||||||||
50 | 40 50 60 80 | 40.0~80.0 | 125 | H+51 | 25 | 15 | 75 | 100 | 14 | 38 | M12 Depth 24 | 14 | 20 | 13 |