We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting MISUMI CLMSC4-12-R, make contact with FAMAGA, the world's influential supplier of mechanized equipment. Our company has progressed for more than ten years - these are years of experience, which are symbolized in the quality of products and private attention to each consumer. We respect everyone, who liased with us - therefore, our regular customers obtain the most flexible purchase conditions and discounts on the manufacturing equipment market. At this time, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, The Bahamas, Croatia, Dominican Republic, Angola, Slovenia, Vietnam, El Salvador, Kuwait, Burma, Switzerland, Turkmenistan, Grenada, Algeria, Burkina Faso, Costa Rica, Eritrea, Philippines, Antigua and Barbuda, Netherlands, Fiji, Estonia, Bangladesh, Finland, Hungary, Sweden, Andorra, Seychelles, Mexico, Eswatini, Yemen, Ukraine, Indonesia, Cameroon, Albania, Mongolia, Zimbabwe, Iceland, Botswana, Togo, Madagascar, Australia, Mauritania, Iran. A well-built logistics network and a partnership network assist us to conduct our goods anywhere in the world quickly without compromising product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as keep on top of it.
To consult or book, contact us or send a message to the online chat on our site. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Type | Lever | Screw | Spring | |||
Threaded | Tapped | Material | Surface Treatment | Material | Surface Treatment | Material |
CLDMC | CLDFC | Zinc Die Casting | Baked Paint | EN 1.1191 Equiv. | Black Oxide | EN 1.4301 (WPB) Equiv. |
CLMSC | CLFSC | EN 1.4305 Equiv. | - | |||
CLCMC | CLCFC | Chrome Plating, Chrome over Satin Nickel |
Part Number | - | L | - | Lever Color |
CLDMC4 CLDMT4 | - - | 12 16 | - - | M M |
M | R | H | H1 | (h) | S | D | d | Number of Serrated Teeth | B | Max. Load Fmax. (N) | Max. Tightening Force Pmax. (kN) | Reference Mass (g) | |||
EN 1.4305 Equiv. | EN 1.1191 Equiv. | EN 1.4305 Equiv. | EN 1.1191 Equiv. | Threaded | Tapped | ||||||||||
4 | 30 | 29 | 32.5 | 25.8 | 4 | 13 | 10 | 16 | 3 | 48 | 80 | 1.8 | 3.0 | 25 | 23 |
5 | 65 | 108 | 2.9 | 4.8 | 26 | 24 | |||||||||
6 | 110 | 184 | 4.1 | 6.8 | 32 | 30 | |||||||||
8 | 42 | 40 | 43.5 | 32.3 | 7 | 17.5 | 14 | 20 | 4 | 189 | 316 | 7.5 | 12.5 | 60 | - |
Part Number | L Selection | Lever Color | Unit Price | |||||||||
Type | M | CLDMC, CLMSC | CLCMC | CLDMC | CLMSC | CLCMC | ||||||
Threaded CLDMC CLMSC CLCMC | 4 | *8 | 12 | 16 | 20 | 25 | B (Black) M (Orange) S (Silver Gray) *R (Red) *Y (Yellow) | C (Chrome Plating) SC (Satin Nickel Chrome Plating) | ||||
5 | *8 | 12 | 16 | 20 | 25 | 32 | ||||||
6 | *8 | 12 | 16 | 20 | 25 | 32 | ||||||
*8 | 16 | 20 | 25 | 32 | - |
Part Number | L | Lever Color | Unit Price | ||||
Type | M | CLDFC, CLFSC | CLCFC | CLDFC | CLFSC | CLCFC | |
Tapped CLDFC CLFSC CLCFC | 4 | 7 | B (Black) M (Orange) S (Silver Grey) R (Red) Y (Yellow) | C (Chrome Plating) SC (Satin Nickel Chrome Plating) | |||
5 | |||||||
6 |