We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HNTDB20-P[23-35/0.1]-B[5-30/1]-L[10-40/1]
Description
Jig Pins/Standard(h7)/Bullet Nose/Selectable Shank/No Shoulder
Stock availability:
On request
If you are inspecting MISUMI HNTDB20-P[23-35/0.1]-B[5-30/1]-L[10-40/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of merchandises and individual attention to each purchaser. We value everyone, who collaborated with us - hence, our regular purchasers pick up the most acceptable purchase forms and discounts on the factory-made equipment market. At present, there are more than 4000 such buyers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA works all over the planet Germany, United Kingdom, Samoa, Sweden, Afghanistan, Saudi Arabia, Jamaica, Italy, Guinea, Comoros, Guatemala, Malaysia, Niger, Croatia, Hungary, Japan, El Salvador, The Bahamas, Australia, Seychelles, Dominica, Laos, Vietnam, Georgia, Tajikistan, Nepal, South Korea, India, Costa Rica, Greece, Haiti, Mauritius, Paraguay, Qatar, Nigeria, United Arab Emirates, Austria, Swaziland, United States. A advanced logistics chains and a partnership network help us to dispatch our goods anywhere in the planet quickly without undermining product quality.
A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this amount is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, get in touch with us or send a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a made commercial proposal from FAMAGA.
Part Number | Material | Hardness | ||
Type | Retaining Part Shape | Shape | ||
HNTAX | N (Threaded) T (Set Screw) B (Screw Mounted) | Round | EN 1.7220 Equiv. | Treated Hardness 35~40HRC |
HNTD | Diamond | |||
THNTA | Round | EN 1.7242 Equiv. | Carburized Hardness 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Tapped Part | |
THNTD | Diamond |
Type | Retaining Part Shape | Shape | Material | Hardness | Surface Treatment |
D-HNTA | N (Threaded) T (Set Screw) | Round | EN 1.2379 Equiv. | 55HRC ~ (Surface 3000HV) | Dicoat Process |
D-HNTD | Diamond |
Part Number | - | P | - | B | - | L | ||||
Type | Retaining Part Shape | D | ||||||||
HATA | N | 8 | - | P7.8 | - | B15 | - | L8 | ||
HNTAX | T | 8 | - | P12.0 | - | B15 |
Part Number | P 0.1mm Increment | B 1mm Increment | L | L1 | 1 | d | Applicable Set Screw | M (Coarse) | R | W | |||||||||||
Type | Retaining Part Shape | Dh7 | Threaded Selection | Screw Mounted 1mm Increment | Screw Mounted | ||||||||||||||||
Hardened (Round) HNTAX (Diamond) HNTD | Carburized (Round) THNTA (Diamond) THNTD | Dicoat (Round) D-HNTA (Diamond) D-HNTD | N (Threaded) T (Set Screw) B (Screw Mounted) | 6 | 0 - 0.015 | 9.0~12.0 | 5~30 (B≤P3) | 5 | 8 | 10 | - | 6 | 8 | 8 | 4 | M5 | - | 2 | 3 | ||
8 | 11.0~16.0 | 5 | 8 | 10 | 12 | 15 | 10~20 | 10 | 5 | M4 | 3.5 | ||||||||||
10 | 13.0~20.0 | 5~30 (B≤P4) | (5) | (8) | 10 | 12 | 15 | 10~30 | 12 | 10 | 7 | M6 | M5 | 4 | |||||||
10T | 18 | 5 | M6 | 5 | |||||||||||||||||
12 | 0 - 0.018 | 15.0~25.0 | (8) | 10 | 12 | 15 | 18 | 15 | 12 | 10 | 9 | M8 | M5 | 3 | 6 | ||||||
16 | 19.0~32.0 | (10) | 12 | 15 | 18 | 20 | 10~32 | 18 | 13 | M8 | 8 | ||||||||||
20 | 0 - 0.021 | 23.0~35.0 | 12 | 15 | 18 | 20 | 10~40 | 22 | 17 | M10 | 9 |