We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
D-HNTDT10T-P[13-20/0.1]-B[5-30/1]
Description
Jig Pins/Standard(h7)/Bullet Nose/Selectable Shank/No Shoulder
Stock availability:
On request
If you are seeking MISUMI D-HNTDT10T-P[13-20/0.1]-B[5-30/1], reach FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of merchandises and private attention to each purchaser. We value everyone, who collaborated with us - thus, our regular consumers pick up the most acceptable purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such clients, and we constantly sign new agreements. More than 700 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Gabon, Seychelles, Italy, East Timor, Cameroon, Cape Verde, Dominica, Indonesia, Papua New Guinea, Serbia, Bulgaria, Luxembourg, Thailand, Croatia, Bolivia, Japan, Eritrea, Burundi, Sweden, Ecuador, Rwanda, Pakistan, China, Azerbaijan, Nepal, Niger, Malaysia, Libya, South Sudan, Denmark, Qatar, Uganda, Peru, Chile, Samoa, Bangladesh, The Gambia, Latvia. A well-shaped logistics connection and a partnership network assist us to dispatch our units anywhere in the planet on-time without discrediting product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is growing every day. We are pleased that users choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, call us by phone or write a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Part Number | Material | Hardness | ||
Type | Retaining Part Shape | Shape | ||
HNTAX | N (Threaded) T (Set Screw) B (Screw Mounted) | Round | EN 1.7220 Equiv. | Treated Hardness 35~40HRC |
HNTD | Diamond | |||
THNTA | Round | EN 1.7242 Equiv. | Carburized Hardness 55HRC~ (Depth: 0.7 ~ 0.8) Anti-carburizing on Tapped Part | |
THNTD | Diamond |
Type | Retaining Part Shape | Shape | Material | Hardness | Surface Treatment |
D-HNTA | N (Threaded) T (Set Screw) | Round | EN 1.2379 Equiv. | 55HRC ~ (Surface 3000HV) | Dicoat Process |
D-HNTD | Diamond |
Part Number | - | P | - | B | - | L | ||||
Type | Retaining Part Shape | D | ||||||||
HATA | N | 8 | - | P7.8 | - | B15 | - | L8 | ||
HNTAX | T | 8 | - | P12.0 | - | B15 |
Part Number | P 0.1mm Increment | B 1mm Increment | L | L1 | 1 | d | Applicable Set Screw | M (Coarse) | R | W | |||||||||||
Type | Retaining Part Shape | Dh7 | Threaded Selection | Screw Mounted 1mm Increment | Screw Mounted | ||||||||||||||||
Hardened (Round) HNTAX (Diamond) HNTD | Carburized (Round) THNTA (Diamond) THNTD | Dicoat (Round) D-HNTA (Diamond) D-HNTD | N (Threaded) T (Set Screw) B (Screw Mounted) | 6 | 0 - 0.015 | 9.0~12.0 | 5~30 (B≤P3) | 5 | 8 | 10 | - | 6 | 8 | 8 | 4 | M5 | - | 2 | 3 | ||
8 | 11.0~16.0 | 5 | 8 | 10 | 12 | 15 | 10~20 | 10 | 5 | M4 | 3.5 | ||||||||||
10 | 13.0~20.0 | 5~30 (B≤P4) | (5) | (8) | 10 | 12 | 15 | 10~30 | 12 | 10 | 7 | M6 | M5 | 4 | |||||||
10T | 18 | 5 | M6 | 5 | |||||||||||||||||
12 | 0 - 0.018 | 15.0~25.0 | (8) | 10 | 12 | 15 | 18 | 15 | 12 | 10 | 9 | M8 | M5 | 3 | 6 | ||||||
16 | 19.0~32.0 | (10) | 12 | 15 | 18 | 20 | 10~32 | 18 | 13 | M8 | 8 | ||||||||||
20 | 0 - 0.021 | 23.0~35.0 | 12 | 15 | 18 | 20 | 10~40 | 22 | 17 | M10 | 9 |