We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMS25-P0-MS10-L[1-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are seeking MISUMI KJPMS25-P0-MS10-L[1-35/1]-B[5-25/1], call FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are expressed in the quality of outputs and special attention to each client. We cherish everyone, who conspired with us - therefore, our regular purchasers receive the most flexible purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Palestine, Jordan, Libya, Ecuador, Jamaica, Uganda, Lesotho, Moldova, Czech Republic, Niger, Tanzania, Lithuania, Burma, United Arab Emirates, Guinea, Armenia, Turkmenistan, Luxembourg, Malawi, Dominica, Grenada, Togo, Equatorial Guinea, Afghanistan, Antigua and Barbuda, New Zealand, Hungary, Peru, Norway, Liechtenstein, Central African Republic, Paraguay, Albania, Belize, Sudan, Philippines, Suriname, Iceland, Mauritania, Greece, Mauritius, Cameroon, Senegal. A well-shaped logistics series and a partnership network let us to conduct our products anywhere in the globe quickly without compromising product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the range of machine made streamlined equipment.
All outcomes from FAMAGA are verified - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this amount is increasing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as to stay on the top.
To consult or make a request, get in touch with us or write to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |