We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMS16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are seeking MISUMI KJPMS16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1], catch up with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are depicted in the quality of products and special attention to each buyer. We admire everyone, who liased with us - therefore, our regular purchasers get the most desirable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Bhutan, North Korea, Montenegro, Tunisia, Cyprus, Iraq, Palestine, Hungary, Ghana, Congo, Rwanda, Kiribati, Moldova, Saudi Arabia, Djibouti, Chad, Zambia, Burundi, Samoa, Uzbekistan, Haiti, Gambia, Luxembourg, Malawi, Yemen, Tonga, Sudan, Libya, Botswana, India, Algeria, Bulgaria, Benin, Cameroon, Bosnia and Herzegovina, Panama, Mauritius, Greece, Mozambique, Brazil, Jordan, Denmark, New Zealand. A well-shaped logistics link and a partnership network allow us to conduct our goods anywhere in the globe with no delay without compromising product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only professionals, who already have experience in the direction of machine made streamlined equipment.
All goods from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or send a message to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |