We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMS12-P0-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are inspecting MISUMI KJPMS12-P0-MS10-L[0-35/1]-B[5-25/1], call FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are ages of experience, which are expressed in the quality of outputs and private attention to each user. We cherish everyone, who collaborated with us - therefore, our regular clients accept the most flexible purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Grenada, Tonga, Bulgaria, Cameroon, Panama, Sierra Leone, Belgium, Israel, Montenegro, Congo, France, Kyrgyzstan, India, Brazil, Chad, China, Liberia, Lithuania, Jordan, Pakistan, Turkmenistan, Zimbabwe, Uzbekistan, Serbia, Saudi Arabia, Swaziland, Andorra, Equatorial Guinea, Paraguay, Benin, Armenia, Iraq, Senegal, United States, Malta, Ecuador, United Arab Emirates, Costa Rica, Mali, Seychelles, Niger, Antigua and Barbuda, Eswatini, Uruguay. A well-built logistics link and a partnership network assist us to ship our goods anywhere in the earth immediately without discrediting product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of factory-made equipment.
All items from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is amounting every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or make a request, phone us or write to the online chat on our site. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |