We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMH25-P[15-23/0.01]-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are inspecting MISUMI KJPMH25-P[15-23/0.01]-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are depicted in the quality of products and private attention to each customer. We admire everyone, who worked with us - therefore, our regular clients bring in the most desirable purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Gambia, Norway, Australia, Denmark, Togo, Congo, Grenada, Paraguay, Iran, Lebanon, Burma, Kazakhstan, Laos, Israel, Liechtenstein, Peru, Azerbaijan, Moldova, North Korea, Guatemala, Saudi Arabia, Belize, Pakistan, Turkmenistan, Sweden, Netherlands, Kenya, Monaco, Bulgaria, Mauritania, Zambia, South Sudan, New Zealand, Belarus, Eswatini, Tunisia, Djibouti, Burundi, Niger, Madagascar, Rwanda, Tonga, Macedonia, Equatorial Guinea. A well-built logistics network and a partnership network help us to ship our items anywhere in the earth quickly without discrediting product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the cause of our work. Now, more than 10 million units of products have been shipped, and this quantity is ascending every day. We are glad that buyers choose FAMAGA again and again, and we are pleased to make more progressive and technologically modern industrial equipment so as stay in control.
To request or book, get in touch with us or write a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |