We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMH16-P0-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are inspecting MISUMI KJPMH16-P0-MS10-L[0-35/1]-B[5-25/1], call FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outputs and private attention to each orderer. We cherish everyone, who joined with us - therefore, our regular clients pick up the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Ecuador, India, Bangladesh, Ukraine, Luxembourg, Lebanon, Gambia, Bulgaria, Uganda, Malawi, Saudi Arabia, Turkey, Namibia, Paraguay, Jordan, Botswana, Antigua and Barbuda, Hungary, Tanzania, South Korea, Turkmenistan, Cameroon, Guatemala, Burundi, Costa Rica, Nicaragua, Armenia, South Sudan, Australia, Mozambique, Argentina, Sudan, Seychelles, Macedonia, Andorra, Serbia, Malta, Rwanda, Kuwait, Austria, Norway, Iceland, Georgia. A well-built logistics system and a partnership network cheer us to ship our units anywhere in the earth with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or make a request, phone us or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |