We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMH16L-P[16-25/0.01]-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are pursuing MISUMI KJPMH16L-P[16-25/0.01]-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of products and personalseparate attention to each buyer. We admire everyone, who liased with us - therefore, our regular consumers get the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Jordan, Iceland, Algeria, India, Albania, Bhutan, Liechtenstein, Thailand, Equatorial Guinea, Liberia, Gambia, Australia, Brazil, Ghana, Cameroon, Ireland, Malta, Kyrgyzstan, Ukraine, Seychelles, Ecuador, Tonga, Belarus, Tunisia, Tajikistan, Russia, Mongolia, Angola, Central African Republic, Mexico, Niger, Iraq, Afghanistan, Armenia, Tanzania, Finland, Andorra, Libya, Suriname, Montenegro, Macedonia, Zambia, Croatia. A well-developed logistics bond and a partnership network cheer us to send our units anywhere in the earth with no delay without undermining product quality.
A particular source of repute for FAMAGA is its staff members, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been shipped, and this quantity is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or book, call us by phone or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |