We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMH12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are inspecting MISUMI KJPMH12-P[5-10/0.01]-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are depicted in the quality of products and private attention to each client. We admire everyone, who conspired with us - therefore, our regular clients receive the most desirable purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Tunisia, Laos, Sierra Leone, Nigeria, Samoa, Malawi, Ecuador, Australia, Iraq, Uzbekistan, Turkmenistan, Uruguay, Slovakia, Bulgaria, North Korea, Egypt, Tonga, Libya, Kiribati, Mexico, Burundi, Denmark, South Korea, Malta, Saudi Arabia, Angola, Zambia, Georgia, Bangladesh, Latvia, Chile, Bosnia and Herzegovina, Madagascar, Iceland, Kenya, Pakistan, Eswatini, Austria, Dominica, Senegal, India, Greece, Qatar. A well-built logistics chains and a partnership network assist us to ship our goods anywhere in the earth immediately without discrediting product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been provided, and this bulk is amounting every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as stay in control.
To consult or make a request, call us by phone or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |