We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMH10L-P0-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are seeking MISUMI KJPMH10L-P0-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of products and special attention to each customer. We admire everyone, who worked with us - therefore, our regular purchasers bring in the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Tonga, Mali, Lesotho, Sri Lanka, Zambia, United States, Antigua and Barbuda, Uganda, Dominican Republic, Ecuador, Sudan, Rwanda, Iran, Eswatini, South Korea, Tanzania, Ghana, Iceland, Indonesia, Cameroon, Kenya, Comoros, Denmark, Uzbekistan, Gambia, Philippines, Namibia, Malaysia, Iraq, Yemen, Kyrgyzstan, Belize, Swaziland, Lithuania, India, Ireland, Ukraine, Bulgaria, Costa Rica, Australia, Mongolia, Moldova, Vietnam. A well-elaborated logistics network and a partnership network cheer us to dispatch our units anywhere in the earth with no delay without compromising product quality.
A particular source of good name for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are eager to make more developed and technologically advanced industrial equipment so as to stay on the top.
To consult or make a request, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |