We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPMC25-P0-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are looking for MISUMI KJPMC25-P0-MS10-L[0-35/1]-B[5-25/1], call FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are expressed in the quality of outputs and individual attention to each client. We cherish everyone, who conspired with us - therefore, our regular buyers receive the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Eswatini, Moldova, France, Cuba, Mali, Egypt, Malta, Equatorial Guinea, Papua New Guinea, Jordan, Iraq, Libya, Uruguay, Kenya, Seychelles, Ukraine, Senegal, Zambia, Swaziland, Tonga, Kiribati, Latvia, Norway, Azerbaijan, Liechtenstein, Qatar, Brazil, Japan, Panama, Gambia, Nepal, Paraguay, Antigua and Barbuda, Morocco, Namibia, Iceland, Mauritania, India, Thailand, Tajikistan, Central African Republic, Lithuania, Slovakia, Togo. A advanced logistics chains and a partnership network cheer us to deliver our units anywhere in the earth with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To inquire or make a request, phone us or write a message to the online chat on our site. You can also send a list of the needful equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |