We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPM20L-P[20-30/0.01]-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are looking for MISUMI KJPM20L-P[20-30/0.01]-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of products and individual attention to each purchaser. We admire everyone, who cooperated with us - therefore, our regular buyers procure the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such clients, and we constantly form new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Greece, Montenegro, Turkmenistan, Guyana, Austria, Yemen, Iceland, Fiji, Kiribati, Gambia, Uganda, Argentina, Dominica, Moldova, Bosnia and Herzegovina, Czech Republic, Bhutan, Laos, Niger, Costa Rica, Namibia, Norway, Albania, Bulgaria, Malaysia, Samoa, Andorra, Liechtenstein, Bangladesh, India, Burundi, Kazakhstan, Tanzania, Israel, Swaziland, Slovakia, Jordan, Ukraine, Tonga, Libya, Turkey, Ireland. A advanced logistics series and a partnership network cheer us to deliver our units anywhere in the earth with no delay without damaging product quality.
A particular source of dignity for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. Now, more than 10 million units of products have been provided, and this bulk is ascending every day. We are glad that buyers choose FAMAGA again and again, and we strive to make more exceptional and technologically advanced industrial equipment so as stay in control.
To ask a question or order, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |