We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGMS16-P[8-14/0.01]-MS10-L[0-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are inspecting MISUMI KJPGMS16-P[8-14/0.01]-MS10-L[0-35/1]-B[5-25/1], catch up with FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are years of experience, which are depicted in the quality of products and private attention to each buyer. We admire everyone, who liased with us - therefore, our regular clients get the most desirable purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly arrange new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, South Africa, Ghana, Belgium, Bahrain, Kenya, Switzerland, Iraq, Portugal, Czech Republic, Togo, Myanmar, Grenada, Hungary, Chad, Colombia, Tanzania, Japan, Senegal, Gambia, Turkey, Sudan, Paraguay, Iran, Bulgaria, Brazil, Mexico, Liberia, Samoa, Turkmenistan, Latvia, Mali, Ukraine, South Sudan, Israel, Armenia, Sierra Leone, Moldova, Central African Republic, Antigua and Barbuda, Australia, Nigeria, Slovakia, Greece, Equatorial Guinea, Malta, Swaziland. A well-built logistics bond and a partnership network cheer us to ship our units anywhere in the earth with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as keep on top of it.
To get some advice or place an order, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the necessary equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |