We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGM16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped and Threaded Type
Stock availability:
On request
If you are seeking MISUMI KJPGM16-P[8-14/0.01]-MS10-L[1-35/1]-B[5-25/1], call FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are years of experience, which are expressed in the quality of outputs and special attention to each orderer. We cherish everyone, who joined with us - therefore, our regular purchasers pick up the most flexible purchase terms and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such buyers, and we constantly make new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Monaco, Laos, Switzerland, Uruguay, Suriname, India, Palestine, Dominica, Saudi Arabia, Japan, Brazil, Albania, Australia, Guatemala, North Korea, Slovakia, Vietnam, Estonia, Philippines, Ukraine, Tanzania, Fiji, Niger, Gambia, Norway, Liechtenstein, Central African Republic, Poland, Moldova, Iceland, Andorra, Equatorial Guinea, Hungary, Jamaica, Argentina, Austria, Botswana, Algeria, Panama, Tunisia, South Korea, Montenegro, Namibia. A well-shaped logistics connection and a partnership network guide us to conduct our elements anywhere in the globe immediately without compromising product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All products from FAMAGA are assured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been supplied, and this quantity is ascending every day. We are pleased that customers choose FAMAGA again and again, and we are glad to make more progressive and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or write a message to the online chat on our site. You can also direct a list of the needful equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Type | |
P 0 -0.02 | Pg6 | ||
EN 1.1191 Equiv. | - | KJPM | KJPGM |
EN 1.1191 Equiv. | 45HRC~ | KJPMH | KJPGMH |
EN 1.4301 Equiv. | - | KJPMS | KJPGMS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPMC | KJPGMC |
Part Number (TYPE, D) | - | P | - | M | - | L | - | B |
KJPMH16 | - | P11.20 | - | M6 | - | L15 | - | B10 |
Part Number | 0.01mm Increment | M(PM) Selection | 1mm Increment | ||||||||||
Type | D | P | L | B | |||||||||
(P0 -0.02) | (Pg6) | ||||||||||||
(EN 1.1191 Equiv.) KJPM (EN 1.1191 Equiv. Hardened) KJPMH (EN 1.4301 Equiv.) KJPMS (EN 1.4125 Equiv.) KJPMC | (EN 1.1191 Equiv.) KJPGM (EN 1.1191 Equiv. Hardened) KJPGMH (EN 1.4301 Equiv.) KJPGMS (EN 1.4125 Equiv.) KJPGMC | 8 | 4.00~6.00 | 3 | 4 | 0~35 (LPx4) When L=0, specify P as 0. | 5~25
(M | ||||||
10 | 5.00~8.00 | 4 | 5 | 6 | 8 | ||||||||
12 | 5.00~10.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
16 | 8.00~14.00 | 4 | 5 | 6 | 8 | 10 | S10 | 12 | |||||
20 | 10.00~18.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
25 | 15.00~23.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
10L | 10.00~16.00 | 4 | 5 | 6 | 8 | 10 | S10 | ||||||
12L | 12.00~20.00 | 5 | 6 | 8 | 10 | S10 | 12 | ||||||
16L | 16.00~25.00 | 6 | 8 | 10 | S10 | 12 | (L+B50) | ||||||
20L | 20.00~30.00 | 6 | 8 | 10 | S10 | 12 |