We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPV25-P[15-23/0.01]-S[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]-V[9-22/0.1]-W[1-21.5/0.5]
Description
Slot Pins for Inspection Jigs/Stepped Diamond/Straight Type
Stock availability:
On request
If you are looking for MISUMI KJPV25-P[15-23/0.01]-S[8-21/0.01]-F[2-10/0.1]-L[5-25/1]-B[5-25/1]-V[9-22/0.1]-W[1-21.5/0.5], communicate with FAMAGA, the world's primary supplier of manufacturing equipment. Our company has operated for more than ten years - these are cycles of experience, which are expressed in the quality of items and special attention to each orderer. We esteem everyone, who conspired with us - so, our regular clients procure the most beneficial purchase terms and discounts on the manufacturing equipment market. At this moment, there are more than 4 thousand such clients, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Kenya, Latvia, Chile, Mozambique, Georgia, Cuba, United Arab Emirates, Morocco, Ghana, Eritrea, New Zealand, Botswana, Sweden, Slovakia, Honduras, Libya, Malawi, Greece, Burkina Faso, Grenada, Egypt, India, Suriname, Bolivia, Mauritania, Malta, Fiji, Equatorial Guinea, Nepal, Mexico, United States, Norway, Syria, Lithuania, Kuwait, Ecuador, Russia, Turkey, China, Brazil, Finland, Sudan, Philippines, Swaziland. A well-built logistics network and a partnership network allow us to dispatch our elements anywhere in the world with no delay without discrediting product quality.
A specific source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are happy that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as not to lower the bar.
To request or order, phone us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPVM | KJPGVM | KJPV | KJPGV |
EN 1.1191 Equiv. | 45HRC~ | - | - | KJPVH | KJPGVH |
EN 1.4301 Equiv. | - | - | - | - | KJPGVS |
Part Number (TYPE, D) | - | P | - | S | - | F | - | L | - | B | - | V | - | W |
KJPV16 | - | P8.00 | - | S4.00 | - | F1.0 | - | L10 | - | B10 | - | V7.0 | - | W5.0 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~28.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | 0.1mm Increment | 0.5mm Increment | M | ||||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FL | B | V P>V
VS+1 | W(V>W) | | |||
(S0 -0.02) | (Sg6) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | |||||||||
(EN 1.1191 Equiv.) KJPVM | (EN 1.1191 Equiv.) KJPGVM | (EN 1.1191 Equiv.) KJPV (EN 1.1191 Equiv. Hardened) KJPVH | (EN 1.1191 Equiv.) KJPGV (EN 1.1191 Equiv. Hardened) KJPGVH (EN 1.4301 Equiv.) KJPGVS | 8 | 4.00~ 6.00 | 3.00~ 4.00 | 0.3~ 2.0 | 5~10 | 5~15 | 4.0~ 5.0 | 1.0~ 4.5 | M4 |
10 | 4.00~ 8.00 | 3.00~ 6.00 | 0.3~ 3.0 | 5~25 For EN 1.4301 Equiv., LPx5 | 5~25 For EN 1.4301 Equiv., BSx5 | 4.0~ 7.0 | 1.0~ 6.5 | M5 | ||||
12 | 4.00~10.00 | 3.00~ 8.00 | 0.3~ 4.0 | 4.0~ 9.0 | 1.0~ 8.5 | M5 | ||||||
16 | 8.00~14.00 | 3.00~12.00 | 0.5~ 6.0 | 4.0~13.0 | 1.0~12.5 | M5 | ||||||
20 | 10.00~18.00 | 5.00~16.00 | 1.0~ 8.0 | 6.0~17.0 | 1.0~16.5 | M5 | ||||||
25 | 15.00~23.00 | 8.00~21.00 | 2.0~10.0 | 9.0~22.0 | 1.0~21.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~14.00 | 1.0~ 7.0 | 6.0~15.0 | 1.0~14.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~18.00 | 2.0~ 9.0 | 7.0~19.0 | 1.0~18.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~23.00 | 2.0~11.0 | 9.0~24.0 | 1.0~23.5 | M5 | ||||||
20L | 20.00~30.00 | 10.00~28.00 | 2.0~14.0 | 11.0~29.0 | 1.0~28.5 | M5 |