We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTKS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped Diamond and Tapered Type
Stock availability:
On request
If you are looking for MISUMI KJPGDTKS10-P[4-8/0.01]-S[3-7/0.01]-F[0.3-3/0.1]-B[5-25/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of outcomes and individual attention to each customer. We value everyone, who worked with us - thus, our regular buyers bring in the most convenient purchase conditions and discounts on the factory-made equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the world Germany, United Kingdom, Czech Republic, Dominican Republic, Algeria, Cambodia, Benin, Philippines, Papua New Guinea, Malawi, South Korea, The Bahamas, Oman, Nicaragua, Suriname, Equatorial Guinea, Singapore, Eritrea, Ukraine, Australia, Zimbabwe, Mauritius, Kazakhstan, Croatia, Seychelles, Costa Rica, Brazil, Peru, Qatar, Belize, Dominica, Kyrgyzstan, Togo, Iran, Zambia, Finland, Panama, Afghanistan, Bangladesh, Kuwait, Serbia, Ireland, Kenya. A well-shaped logistics network and a partnership network guide us to send our elements anywhere in the world with no delay without compromising product quality.
A specific source of repute for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All products from FAMAGA are guaranteed - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is amounting every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To ask a question or place an order, get in touch with us or send a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTKM | KJPGDTKM | KJPDTK | KJPGDTK |
EN 1.1191 Equiv. | 45HRC~ | KJPDTKMH | KJPGDTKMH | KJPDTHK | KJPGDTHK |
EN 1.4301 Equiv. | - | KJPDTKMS | KJPGDTKMS | KJPDTKS | KJPGDTKS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTKMC | KJPGDTKMC | KJPDTKC | KJPGDTKC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B |
KJPDTK12L | - | P16.00 | - | S8.00 | - | F2.2 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | (W) | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | | ||||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | |||||||
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4125 Equiv.) KJPDTKMC | (EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4125 Equiv.) KJPGDTKMC | (EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4125 Equiv.) KJPDTKC | (EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4125 Equiv.) KJPGDTKC | 8 | 4.00~6.00 | 3.00~5.00 | 0.3~2.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 2 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.0 | M5 | ||||||
12 | 6.00~10.00 | 3.00~9.00 | 0.3~4.0 | 3 | ||||||
16 | 8.00~14.00 | 3.00~13.00 | 0.5~6.0 | 4 | ||||||
20 | 12.00~18.00 | 5.00~17.00 | 1.0~8.0 | 6 | ||||||
25 | 16.00~23.00 | 8.00~22.00 | 2.0~10.0 | 8 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.0 | 4 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.0 | 6 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~11.0 | 8 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.0 |