We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTKMH20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped Diamond and Tapered Type
Stock availability:
On request
If you are seeking MISUMI KJPGDTKMH20-P[12-18/0.01]-S[5-17/0.01]-B[5-25/1], call FAMAGA, the world's chief distributor of machine made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and special attention to each buyer. We cherish everyone, who liased with us - therefore, our regular purchasers get the most flexible purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such buyers, and we constantly compose new agreements. More than 700 contracts are concluded per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Latvia, Belgium, Spain, Bahamas, Slovakia, Denmark, Guinea, The Bahamas, Paraguay, Ecuador, Chad, Burundi, Sudan, Lebanon, Liberia, Uzbekistan, Estonia, Malawi, Syria, Saudi Arabia, Bosnia and Herzegovina, Yemen, Eswatini, Ghana, Monaco, Burkina Faso, Mali, Norway, Jamaica, Algeria, Afghanistan, Nigeria, Dominica, Benin, Argentina, Ukraine, Senegal, Zimbabwe, Central African Republic, Greece, Hungary, Cape Verde. A well-elaborated logistics chains and a partnership network help us to send our elements anywhere in the globe immediately without discrediting product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only specialists, who already have experience in the range of factory-made equipment.
All outputs from FAMAGA are verified - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is rising every day. We are pleased that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To inquire or order, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTKM | KJPGDTKM | KJPDTK | KJPGDTK |
EN 1.1191 Equiv. | 45HRC~ | KJPDTKMH | KJPGDTKMH | KJPDTHK | KJPGDTHK |
EN 1.4301 Equiv. | - | KJPDTKMS | KJPGDTKMS | KJPDTKS | KJPGDTKS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTKMC | KJPGDTKMC | KJPDTKC | KJPGDTKC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B |
KJPDTK12L | - | P16.00 | - | S8.00 | - | F2.2 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | (W) | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | | ||||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | |||||||
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4125 Equiv.) KJPDTKMC | (EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4125 Equiv.) KJPGDTKMC | (EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4125 Equiv.) KJPDTKC | (EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4125 Equiv.) KJPGDTKC | 8 | 4.00~6.00 | 3.00~5.00 | 0.3~2.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 2 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.0 | M5 | ||||||
12 | 6.00~10.00 | 3.00~9.00 | 0.3~4.0 | 3 | ||||||
16 | 8.00~14.00 | 3.00~13.00 | 0.5~6.0 | 4 | ||||||
20 | 12.00~18.00 | 5.00~17.00 | 1.0~8.0 | 6 | ||||||
25 | 16.00~23.00 | 8.00~22.00 | 2.0~10.0 | 8 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.0 | 4 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.0 | 6 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~11.0 | 8 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.0 |