We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPGDTKMC25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped Diamond and Tapered Type
Stock availability:
On request
If you are pursuing MISUMI KJPGDTKMC25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1], call FAMAGA, the world's main producer of manufacturing equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of outputs and personalseparate attention to each orderer. We cherish everyone, who joined with us - therefore, our regular consumers pick up the most flexible purchase forms and discounts on the manufacturing equipment market. At present, there are more than 4000 such customers, and we constantly arrange new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the earth Germany, United Kingdom, Yemen, Bhutan, Portugal, Honduras, Rwanda, Kenya, Saudi Arabia, South Sudan, Montenegro, Turkmenistan, Cameroon, Sierra Leone, Lebanon, Grenada, Ecuador, Albania, Gambia, Haiti, Uzbekistan, Liberia, Morocco, Netherlands, Ukraine, Turkey, Fiji, Seychelles, Brazil, Kiribati, Qatar, Liechtenstein, Brunei, Zambia, Costa Rica, Egypt, Slovakia, Armenia, Australia, Antigua and Barbuda, Equatorial Guinea, Moldova, Czech Republic, Peru. A well-developed logistics bond and a partnership network assist us to deliver our goods anywhere in the globe with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the range of manufacturing equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is growing every day. We are pleased that consumers choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To request or place an order, phone us or write to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTKM | KJPGDTKM | KJPDTK | KJPGDTK |
EN 1.1191 Equiv. | 45HRC~ | KJPDTKMH | KJPGDTKMH | KJPDTHK | KJPGDTHK |
EN 1.4301 Equiv. | - | KJPDTKMS | KJPGDTKMS | KJPDTKS | KJPGDTKS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTKMC | KJPGDTKMC | KJPDTKC | KJPGDTKC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B |
KJPDTK12L | - | P16.00 | - | S8.00 | - | F2.2 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | (W) | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | | ||||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | |||||||
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4125 Equiv.) KJPDTKMC | (EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4125 Equiv.) KJPGDTKMC | (EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4125 Equiv.) KJPDTKC | (EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4125 Equiv.) KJPGDTKC | 8 | 4.00~6.00 | 3.00~5.00 | 0.3~2.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 2 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.0 | M5 | ||||||
12 | 6.00~10.00 | 3.00~9.00 | 0.3~4.0 | 3 | ||||||
16 | 8.00~14.00 | 3.00~13.00 | 0.5~6.0 | 4 | ||||||
20 | 12.00~18.00 | 5.00~17.00 | 1.0~8.0 | 6 | ||||||
25 | 16.00~23.00 | 8.00~22.00 | 2.0~10.0 | 8 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.0 | 4 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.0 | 6 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~11.0 | 8 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.0 |