We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDTKS12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped Diamond and Tapered Type
Stock availability:
On request
If you are pursuing MISUMI KJPDTKS12-P[6-10/0.01]-S[3-9/0.01]-F[0.3-4/0.1]-B[5-25/1], communicate with FAMAGA, the world's primary vendor of factory-made equipment. Our company has operated for more than ten years - these are ages of experience, which are described in the quality of items and personalseparate attention to each client. We esteem everyone, who conspired with us - thus, our regular consumers receive the most favorable purchase forms and discounts on the factory-made equipment market. At present, there are more than 3500 such customers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Cuba, Panama, Tonga, Haiti, Slovenia, South Korea, Switzerland, Iceland, Colombia, Canada, Cape Verde, Botswana, Serbia, Bulgaria, Malaysia, China, Togo, Angola, Kenya, Poland, Belize, Nigeria, Jamaica, Bosnia and Herzegovina, Sweden, Seychelles, Brazil, Georgia, Brunei, Djibouti, Uganda, Syria, Mexico, United Arab Emirates, Samoa, Estonia, Suriname, Tajikistan, Montenegro. A advanced logistics chains and a partnership network allow us to dispatch our goods anywhere in the world quickly without discrediting product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been delivered, and this amount is increasing every day. We are proud that buyers choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or place an order, get in touch with us or write to the online chat on our site. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTKM | KJPGDTKM | KJPDTK | KJPGDTK |
EN 1.1191 Equiv. | 45HRC~ | KJPDTKMH | KJPGDTKMH | KJPDTHK | KJPGDTHK |
EN 1.4301 Equiv. | - | KJPDTKMS | KJPGDTKMS | KJPDTKS | KJPGDTKS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTKMC | KJPGDTKMC | KJPDTKC | KJPGDTKC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B |
KJPDTK12L | - | P16.00 | - | S8.00 | - | F2.2 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | (W) | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | | ||||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | |||||||
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4125 Equiv.) KJPDTKMC | (EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4125 Equiv.) KJPGDTKMC | (EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4125 Equiv.) KJPDTKC | (EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4125 Equiv.) KJPGDTKC | 8 | 4.00~6.00 | 3.00~5.00 | 0.3~2.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 2 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.0 | M5 | ||||||
12 | 6.00~10.00 | 3.00~9.00 | 0.3~4.0 | 3 | ||||||
16 | 8.00~14.00 | 3.00~13.00 | 0.5~6.0 | 4 | ||||||
20 | 12.00~18.00 | 5.00~17.00 | 1.0~8.0 | 6 | ||||||
25 | 16.00~23.00 | 8.00~22.00 | 2.0~10.0 | 8 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.0 | 4 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.0 | 6 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~11.0 | 8 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.0 |