We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDTKMC25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1]
Description
Slot Pins for Inspection Jigs/Stepped Diamond and Tapered Type
Stock availability:
On request
If you are inspecting MISUMI KJPDTKMC25-P[16-23/0.01]-S[8-22/0.01]-B[5-25/1], call FAMAGA, the world's top supplier of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are expressed in the quality of outputs and private attention to each user. We cherish everyone, who collaborated with us - therefore, our regular clients accept the most flexible purchase conditions and discounts on the manufacturing equipment market. Now, there are more than 4000 such consumers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Malawi, Nigeria, China, Palestine, Liberia, Bulgaria, Laos, Ireland, Gambia, Turkmenistan, Namibia, Rwanda, Brazil, Syria, Kiribati, Mali, Lithuania, Albania, Senegal, Cyprus, United States, Kenya, Antigua and Barbuda, Uzbekistan, Thailand, Comoros, Norway, Bangladesh, Greece, Burundi, Jordan, Australia, Iceland, Hungary, Argentina, Bosnia and Herzegovina, Eswatini, Dominica. A well-built logistics system and a partnership network help us to dispatch our elements anywhere in the globe immediately without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of manufacturing equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this quantity is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To consult or place an order, phone us or send a message to the online chat on our site. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material1 | Hardness | Round Tip | D-Shape Tip | ||
Type | Type | ||||
S 0 -0.02 | Sg6 | S 0 -0.02/F 0 -0.05 | Sg6/F 0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPDTKM | KJPGDTKM | KJPDTK | KJPGDTK |
EN 1.1191 Equiv. | 45HRC~ | KJPDTKMH | KJPGDTKMH | KJPDTHK | KJPGDTHK |
EN 1.4301 Equiv. | - | KJPDTKMS | KJPGDTKMS | KJPDTKS | KJPGDTKS |
2 EN 1.4125 Equiv. | 45~50HRC | KJPDTKMC | KJPGDTKMC | KJPDTKC | KJPGDTKC |
Part Number (TYPE, D) | - | P | - | S | - | F | - | B |
KJPDTK12L | - | P16.00 | - | S8.00 | - | F2.2 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | (W) | M | |||||
Round Tip | D-Shape Tip | D | P | S(P-1S) | F(FB | | ||||
S0 -0.02 | Sg6 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | |||||||
(EN 1.1191 Equiv.) KJPDTKM (EN 1.1191 Equiv. Hardened) KJPDTKMH (EN 1.4301 Equiv.) KJPDTKMS (EN 1.4125 Equiv.) KJPDTKMC | (EN 1.1191 Equiv.) KJPGDTKM (EN 1.1191 Equiv. Hardened) KJPGDTKMH (EN 1.4301 Equiv.) KJPGDTKMS (EN 1.4125 Equiv.) KJPGDTKMC | (EN 1.1191 Equiv.) KJPDTK (EN 1.1191 Equiv. Hardened) KJPDTHK (EN 1.4301 Equiv.) KJPDTKS (EN 1.4125 Equiv.) KJPDTKC | (EN 1.1191 Equiv.) KJPGDTK (EN 1.1191 Equiv. Hardened) KJPGDTHK (EN 1.4301 Equiv.) KJPGDTKS (EN 1.4125 Equiv.) KJPGDTKC | 8 | 4.00~6.00 | 3.00~5.00 | 0.3~2.0 | 5~25 For EN 1.4301 Equiv., BSx5 | 2 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.0 | M5 | ||||||
12 | 6.00~10.00 | 3.00~9.00 | 0.3~4.0 | 3 | ||||||
16 | 8.00~14.00 | 3.00~13.00 | 0.5~6.0 | 4 | ||||||
20 | 12.00~18.00 | 5.00~17.00 | 1.0~8.0 | 6 | ||||||
25 | 16.00~23.00 | 8.00~22.00 | 2.0~10.0 | 8 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.0 | 4 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.0 | 6 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~11.0 | 8 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.0 |