We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JPHAFM10-L[10-50/0.01]-D[11-30/1]-F[10-30/1]
Description
Height Adjust Pins/With Shoulder/Round/Wrench Flats
Stock availability:
On request
If you are looking for MISUMI JPHAFM10-L[10-50/0.01]-D[11-30/1]-F[10-30/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are ages of experience, which are symbolized in the quality of products and special attention to each orderer. We esteem everyone, who liased with us - hence, our regular customers obtain the most helpful purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such purchasers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, San Marino, Madagascar, Cambodia, India, Italy, Honduras, Poland, Yemen, Togo, Greece, Angola, Swaziland, Nepal, Burundi, United States, Eswatini, Samoa, Chad, Romania, Djibouti, Azerbaijan, North Korea, Cyprus, Belarus, Liechtenstein, Malaysia, Liberia, Croatia, Ireland, Monaco, Burkina Faso, Bolivia, Russia, Mauritius, South Korea, Benin, China, Jordan, Indonesia, Macedonia, Mexico, Syria, East Timor, Kazakhstan, Switzerland, Namibia, Peru, Bangladesh, Philippines, Kuwait. A advanced logistics network and a partnership network guide us to deliver our units anywhere in the earth with no delay without discrediting product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the field of manufacturing equipment.
All outcomes from FAMAGA are ensured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this number is rising every day. We are glad that clients choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as stay in control.
To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also forward a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | Ordering Code, Shape Code | |
F Fixed | F Configurable | ||||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | JPH | AF (Round) AW (Wrench Flats) | AFM (Round) AWM (Wrench Flats) |
Black Oxide | Treated Hardness: 60 ~ 63HRC | BJPH | |||
Hard Chrome Plating Plating Thickness: 3m or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | HJPH | |||
EN 1.4301 Equiv. | - | - | SJPH | ||
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPH | ||
EN 1.7242 Equiv. | - | Carburized Treated Hardness: 55HRC~ (Depth: 0.7 ~ 0.8) | TJPH |
Part Number | - | L | - | D | - | W | - | F | |
Round, Wrench Flats Threaded | |||||||||
(Round, F Fixed) | JPHAF3 | - | 5.21 | - | 6 | ||||
(Round, F Configurable) | JPHAFM3 | - | L5.21 | - | D6 | - | F9 | ||
(Wrench Flats, F Fixed) | HJPHAW10 | - | 20 | - | 15 | - | W11 | ||
(Wrench Flats, F Configurable) | HJPHAWM10 | - | L20.00 | - | D15 | - | W11 | - | F15 |
Shouldered, Threaded | |||||||||
(F Fixed) | JPHA8 | - | 14 | ||||||
(F Configurable) | JPHAM8 | - | L14.00 | - | F10 | ||||
Round, Wrench Flats Tapped | |||||||||
(Round) | JPHUF6 | - | 20.00 | ||||||
(Wrench Flats) | BJPHUW10 | - | 17.00 | - | W8 |
Part Number | L 0.01mm Increment | D 1mm Increment | W 1mm Increment | F | ||||
Type | Shape Code | M (Coarse) | * Tightening Torque Ncm | Standard | 1mm Increment | |||
JPH BJPH HJPH SJPH CJPH TJPH | AF (F Fixed) AFM (F Configurable) AW (F Fixed) AWM (F Configurable) | 3 | 147 | 2.00~10.00 | 5~30
(M4~13 | 5 | 3~36
(MFMx3) | |
4 | 333 | 5~18 | 6 | |||||
5 | 676 | 6~23 | 8 | |||||
6 | 1156 | 5.00~30.00 | 7~28 | |||||
8 | 2803 | 9~29 | 10 | |||||
10 | 5557 | 10.00~50.00 | 11~29 | 12 | ||||
12 | 9702 | 13~29 | 15 |