We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CSHFN4-P[4.5-7/0.1]-Q[2-6/0.01]-K[0-8/1]-L[10-60/0.01]-B[2-10/0.1]
Description
Support Pins/Press Fit/Tapped/Threaded
Stock availability:
On request
If you are pursuing MISUMI CSHFN4-P[4.5-7/0.1]-Q[2-6/0.01]-K[0-8/1]-L[10-60/0.01]-B[2-10/0.1], reach FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of items and special attention to each customer. We respect everyone, who worked with us - so, our regular consumers receive the most beneficial purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the planet Germany, United Kingdom, Greece, Turkey, El Salvador, Kuwait, East Timor, Vietnam, Cuba, Grenada, Czech Republic, Nicaragua, Eritrea, Estonia, Slovenia, Zimbabwe, Andorra, Canada, Moldova, Monaco, Jamaica, Netherlands, Japan, Ireland, Gambia, South Korea, Macedonia, Iraq, Suriname, Brunei, Comoros, Slovakia, Malaysia, Swaziland, Russia, Angola, Morocco, Peru, Poland, Egypt, Malta, Djibouti, Sierra Leone. A well-developed logistics bond and a partnership network assist us to deliver our units anywhere in the earth with no delay without compromising product quality.
A particular source of pride for FAMAGA is its team members, each of whom contributes to common cause. We accept into our team only specialists, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are guaranteed - we are responsible for the result of our work. At this moment, more than 10 million units of products have been delivered, and this number is increasing every day. We are happy that users choose FAMAGA again and again, and we are happy to make more advanced and technologically advanced industrial equipment so as not to lower the bar.
To get some advice or order, call us by phone or send a message to the online chat on our site. You can also direct a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |||||
Straight | Shouldered | |||||||
Press Fit | Tapped | Threaded | Press Fit | Tapped | Threaded | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | SHFJ | SHFU | SHFN | - | SHXU | SHXN |
EN 1.2510 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~ | GSHFJ | GSHFU | GSHFN | GSHXJ | - | - |
EN 1.4301 Equiv. | - | - | SSHFJ | SSHFU | SSHFN | - | - | SSHXN |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CSHFJ | CSHFU | CSHFN | CSHXJ | CSHXU | CSHXN |
Part Number | - | P | - | Q | - | K | - | L | - | B |
SHFJ5 | - | P6.0 | - | Q4.50 | - | K5 | - | L30.55 | - | B3.2 |
D | H | M (Coarse) | M1 (Coarse) | m |
3 | 6 | M3 | - | 1 |
4 | M4 | |||
5 | 8 | M5 | ||
6 | M6 | M3 | 2 | |
8 | 11 | M8 | M4 | |
10 | 13 | M10 | M5 | 3 |
12 | 15 | M12 |
M (Coarse) | Tightening Torque |
N cm | |
M3 | 147 |
M4 | 333 |
M5 | 676 |
M6 | 1156 |
M8 | 2803 |
M10 | 5557 |
M12 | 9702 |
Part Number | P | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | 0.1mm Increment | SHFJ | GSHFJ | SSHFJ | CSHFJ | GSHXJ | CSHXJ | ||||||
Straight | Shouldered | |||||||||||||
Straight SHFJ GSHFJ SSHFJ CSHFJ | Shouldered GSHXJ CSHXJ | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 3~6 | 10.00~60.00 | 2.0~5.0 | ||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 4~8 | 10.00~60.00 | 2.0~10.0 | ||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 5~10 | 10.00~60.00 | 2.0~10.0 | ||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||||
8 | 9.0~13.0 | 5.0~8.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | |||||||
Type | D | SHFU | GSHFU | SSHFU | CSHFU | SHXU | CSHXU | |||||||
Straight | Shouldered | |||||||||||||
Straight SHFU GSHFU SSHFU CSHFU | Shouldered SHXU CSHXU | 6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 6~12 | 10.00~80.00 | 2.0~12.0 | ||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 8~16 | 10.00~80.00 | 2.0~15.0 | ||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 10~20 | 10.00~100.00 | 2.0~20.0 | ||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 12~24 | 10.00~100.00 | 2.0~20.0 |
Part Number | P 0.1mm Increment | Q 0.01mm Increment | K 1mm Increment | L 0.01mm Increment | B 0.1mm Increment | Unit Price Straight | Unit Price Shouldered | ||||||||
Type | D | SHFN | GSHFN | SSHFN | CSHFN | SHXN | SSHXN | CSHXN | |||||||
Straight | Shouldered | ||||||||||||||
Straight SHFN GSHFN SSHFN CSHFN | Shouldered SHXN SSHXN CSHXN | 3 | 3.5~6.0 | 3.0~5.0 | 2.00~5.00 | 0~6 | 10.00~60.00 | 2.0~5.0 | |||||||
4 | 4.5~7.0 | 3.0~5.0 | 2.00~6.00 | 0~8 | 10.00~60.00 | 2.0~10.0 | |||||||||
5 | 5.5~8.0 | 3.0~7.0 | 2.00~7.00 | 0~10 | 10.00~60.00 | 2.0~10.0 | |||||||||
6 | 6.5~10.0 | 5.0~7.0 | 4.00~9.00 | 0~12 | 10.00~80.00 | 2.0~12.0 | |||||||||
8 | 9.0~13.0 | 5.0~9.0 | 4.00~12.00 | 0~16 | 10.00~80.00 | 2.0~15.0 | |||||||||
10 | 11.0~15.0 | 6.0~11.0 | 5.00~14.00 | 0~20 | 10.00~100.00 | 2.0~20.0 | |||||||||
12 | 13.0~16.0 | 6.0~13.0 | 5.00~15.00 | 0~24 | 10.00~100.00 | 2.0~20.0 |