We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHUC16-25
Description
Bushings for Locating Pins/Flanged/Thin Wall
Stock availability:
On request
If you are seeking MISUMI JBHUC16-25, reach FAMAGA, the world's leading vendor of factory-made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of merchandises and private attention to each orderer. We appreciate everyone, who liased with us - therefore, our regular purchasers obtain the most beneficial purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such purchasers, and we constantly arrange new agreements. More than 600 affairs are settled per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Hungary, Togo, Senegal, Seychelles, New Zealand, Armenia, Ireland, Belize, Tanzania, France, Eritrea, Czech Republic, Afghanistan, Burundi, Turkmenistan, Greece, Andorra, Liberia, Chad, Luxembourg, Ecuador, Rwanda, Iceland, Yemen, Nigeria, Norway, Dominica, Mali, Ukraine, Guatemala, Sudan, Uzbekistan, Indonesia, Niger, Laos, Kiribati, Vietnam, Tonga, Jordan, Algeria, Montenegro, Bosnia and Herzegovina, Lithuania, Paraguay, Ghana, Egypt, Serbia, India, Sweden, Cameroon, Australia. A advanced logistics link and a partnership network guide us to ship our units anywhere in the planet quickly without undermining product quality.
A special source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only specialists, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are proud that users choose FAMAGA again and again, and we are eager to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To request or make a request, contact us or write to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |
p6 | m6 | |||
EN 1.3505 or EN 1.2510 Equiv. | - | 58HRC~ | JBHUP | JBHU |
EN 1.3505 or EN 1.2510 Equiv. | Electroless Nickel Plating | 58HRC~ | JBHUNP | JBHUN |
EN 1.4125 Equiv. | - | 50HRC~ | JBHUCP | JBHUC |
Part Number | - | L |
JBH5 | - | 8 |
JBHUN12 | - | 12 |
Part Number | L Selection | Thickness (N) | R | H | T | D | D Tolerance | Unit Price | |||||||||||||||
Type | d | D Tolerance | p6 | m6 | JBHU JBHUP | JBHUN JBHUNP | JBHUC JBHUCP | ||||||||||||||||
No Surface Treatment | Electroless Nickel Plating | ||||||||||||||||||||||
(p6) JBHUP JBHUNP JBHUCP (m6) JBHU JBHUN JBHUC | 3 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 6 | 8 | 10 | 12 | 1 | 0.5 | 9 | 2.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | |||||||
4 | +0.012 +0.004 | +0.012 0 | 6 | 8 | 10 | 12 | 15 | 16 | 10 | 3 | 6 | ||||||||||||
5 | 6 | 8 | 10 | 12 | *15 | *16 | 20 | 11 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||||
6 | 6 | 8 | 10 | 12 | *15 | 16 | 20 | 12 | 8 | ||||||||||||||
8 | +0.014 +0.005 | G6 | +0.014 +0.005 | 6 | 8 | 10 | 12 | *15 | 16 | 20 | 14 | 4 | 10 | ||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 1.5 | 17 | 13 | +0.029 +0.018 | +0.018 +0.007 | |||||||||||
12 | +0.017 +0.006 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | *20 | 19 | 15 | |||||||||||||
13 | 10 | 12 | 15 | 16 | 20 | 2 | 1 | 21 | 5 | 17 | - | - | |||||||||||
15 | 12 | 15 | 16 | 20 | 24 | 19 | +0.035 +0.022 | +0.021 +0.008 | |||||||||||||||
16 | 12 | 15 | 16 | 20 | *25 | 2.5 | 2 | 26 | 21 | ||||||||||||||
20 | +0.020 +0.007 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 3 | 31 | 6 | 26 | ||||||||||||
25 | 20 | 25 | 36 | 31 | +0.042 +0.026 | +0.025 +0.009 |