We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHMN10-16
Description
Bushings for Locating Pins/Flanged/Standard
Stock availability:
On request
If you are looking for MISUMI JBHMN10-16, make contact with FAMAGA, the world's dominant company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are represented in the quality of products and private attention to each purchaser. We cherish everyone, who cooperated with us - thus, our regular clients get the most desirable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 750 contracts are concluded per day, because FAMAGA delivers all over the earth Germany, United Kingdom, South Korea, Brazil, Mexico, Morocco, Chile, Jordan, Suriname, Equatorial Guinea, Serbia, New Zealand, East Timor, Canada, Togo, Eritrea, El Salvador, Malaysia, Azerbaijan, The Gambia, Estonia, Yemen, Bolivia, Zimbabwe, Latvia, Egypt, Greece, Peru, Cape Verde, Ukraine, Qatar, Fiji, Indonesia, Luxembourg, Philippines, United Arab Emirates, Antigua and Barbuda, Comoros, Haiti, Costa Rica, Israel, Nepal, Seychelles. A well-elaborated logistics system and a partnership network guide us to dispatch our goods anywhere in the planet immediately without undermining product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically advanced industrial equipment so as stay in control.
To get some advice or book, contact us or send a message to the online chat on our site. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |
p6 | m6 | |||
EN 1.2510 Equiv. | - | 60HRC~ | JBH | JBHM |
EN 1.2510 Equiv. | Electroless Nickel Plating | 60HRC~ | JBHN | JBHMN |
EN 1.4125 Equiv. | - | 50HRC~ | JBHC | JBHMC |
Part Number | - | L |
JBH5 | - | 8 |
JBHUN12 | - | 12 |
Part Number | L Selection | Thickness (N) | R | H | T | D | D Tolerance | Unit Price | ||||||||||||||||||
Type | d | D Tolerance | p6 | m6 | JBH JBHM | JBHN JBHMN | JBHC JBHMC | |||||||||||||||||||
No Surface Treatment | Electroless Nickel Plating | |||||||||||||||||||||||||
(p6) JBH JBHN JBHC (m6) JBHM JBHMN JBHMC | 2 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 5 | 6 | 8 | 10 | 12 | 1.5 | 0.8 | 9 | 2.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | - | - | |||||||
3 | 5 | 6 | 8 | *10 | 12 | 2 | 11 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||||||||
4 | +0.012 +0.004 | +0.012 0 | *5 | 6 | 8 | 10 | 12 | 15 | *16 | 20 | 2 | 1 | 12 | 3 | 8 | |||||||||||
5 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 2.5 | 14 | 10 | |||||||||||||||
6 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2 | ||||||||||||||||
8 | +0.014 +0.005 | G6 | +0.014 +0.005 | 2 | 2 | 16 | 4 | 12 | +0.029 +0.018 | +0.018 +0.007 | ||||||||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2.5 | 19 | 15 | |||||||||||||||
12 | +0.017 +0.006 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 3 | 22 | 18 | |||||||||||||
13 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 4.5 | 26 | 5 | 22 | +0.035 +0.022 | +0.021 +0.008 | - | ||||||||||||
15 | 10 | *12 | *15 | *16 | *20 | *25 | *30 | 5 | 30 | 25 | ||||||||||||||||
16 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 26 | |||||||||||||||||
20 | +0.020 +0.007 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 3 | 35 | 6 | 30 | |||||||||||||
25 | 16 | 20 | 25 | *30 | 35 | 5 | 40 | 35 | +0.042 +0.026 | +0.025 +0.009 |