We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHMC25-30
Description
Bushings for Locating Pins/Flanged/Standard
Stock availability:
On request
If you are inspecting MISUMI JBHMC25-30, communicate with FAMAGA, the world's chief distributor of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are illustrated in the quality of outputs and personalseparate attention to each consumer. We admire everyone, who engaged with us - thus, our regular consumers receive the most helpful purchase conditions and discounts on the industrial equipment market. At present, there are more than 3500 such customers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Haiti, Central African Republic, Sri Lanka, Bhutan, Sudan, Lithuania, Japan, South Sudan, Romania, Monaco, Madagascar, Nicaragua, Burma, Mozambique, Andorra, Albania, Ireland, Samoa, Afghanistan, Russia, Poland, Liechtenstein, Syria, Thailand, Indonesia, Mexico, Kyrgyzstan, Guatemala, Georgia, Latvia, Cyprus, Benin, Belarus, Greece, Angola, Iceland, Luxembourg, Algeria, Switzerland, Antigua and Barbuda. A advanced logistics network and a partnership network let us to deliver our products anywhere in the planet promptly without damaging product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to common cause. We accept into our team only professionals, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this number is amounting every day. We are pleased that clients choose FAMAGA again and again, and we are pleased to make more progressive and technologically advanced industrial equipment so as stay in control.
To consult or book, contact us or write a message to the online chat on our site. You can also forward a list of the necessary equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |
p6 | m6 | |||
EN 1.2510 Equiv. | - | 60HRC~ | JBH | JBHM |
EN 1.2510 Equiv. | Electroless Nickel Plating | 60HRC~ | JBHN | JBHMN |
EN 1.4125 Equiv. | - | 50HRC~ | JBHC | JBHMC |
Part Number | - | L |
JBH5 | - | 8 |
JBHUN12 | - | 12 |
Part Number | L Selection | Thickness (N) | R | H | T | D | D Tolerance | Unit Price | ||||||||||||||||||
Type | d | D Tolerance | p6 | m6 | JBH JBHM | JBHN JBHMN | JBHC JBHMC | |||||||||||||||||||
No Surface Treatment | Electroless Nickel Plating | |||||||||||||||||||||||||
(p6) JBH JBHN JBHC (m6) JBHM JBHMN JBHMC | 2 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 5 | 6 | 8 | 10 | 12 | 1.5 | 0.8 | 9 | 2.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | - | - | |||||||
3 | 5 | 6 | 8 | *10 | 12 | 2 | 11 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||||||||
4 | +0.012 +0.004 | +0.012 0 | *5 | 6 | 8 | 10 | 12 | 15 | *16 | 20 | 2 | 1 | 12 | 3 | 8 | |||||||||||
5 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 2.5 | 14 | 10 | |||||||||||||||
6 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2 | ||||||||||||||||
8 | +0.014 +0.005 | G6 | +0.014 +0.005 | 2 | 2 | 16 | 4 | 12 | +0.029 +0.018 | +0.018 +0.007 | ||||||||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2.5 | 19 | 15 | |||||||||||||||
12 | +0.017 +0.006 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 3 | 22 | 18 | |||||||||||||
13 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 4.5 | 26 | 5 | 22 | +0.035 +0.022 | +0.021 +0.008 | - | ||||||||||||
15 | 10 | *12 | *15 | *16 | *20 | *25 | *30 | 5 | 30 | 25 | ||||||||||||||||
16 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 26 | |||||||||||||||||
20 | +0.020 +0.007 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 3 | 35 | 6 | 30 | |||||||||||||
25 | 16 | 20 | 25 | *30 | 35 | 5 | 40 | 35 | +0.042 +0.026 | +0.025 +0.009 |