We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
JBHM12-8
Description
Bushings for Locating Pins/Flanged/Standard
Stock availability:
On request
If you are looking for MISUMI JBHM12-8, connect FAMAGA, the world's top supplier of industrialized equipment. Our company has progressed for more than ten years - these are ages of experience, which are portrayed in the quality of goods and private attention to each consumer. We respect everyone, who cooperated with us - hence, our regular purchasers get the most favorable purchase forms and discounts on the factory-made equipment market. Now, there are more than 4500 such consumers, and we constantly make new agreements. More than 700 transactions are made per day, because FAMAGA operates all over the earth Germany, United Kingdom, South Sudan, Egypt, Slovenia, Bhutan, Iran, Nigeria, Netherlands, Georgia, Dominica, Armenia, Morocco, Rwanda, Syria, Greece, Costa Rica, Turkey, Singapore, Guyana, Lithuania, Nicaragua, United Arab Emirates, Ghana, Estonia, Panama, Slovakia, Tajikistan, Argentina, Algeria, Swaziland, Afghanistan, Seychelles, Kyrgyzstan, South Korea, Botswana, Kiribati, El Salvador, Paraguay, Malaysia, Mali, Mauritania, Samoa, Angola, Serbia, Zimbabwe, Togo, Philippines. A well-shaped logistics chains and a partnership network guide us to dispatch our products anywhere in the earth with no delay without disreputing product quality.
A specific source of honor for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only experts, who already have experience in the sphere of industrial equipment.
All merchandises from FAMAGA are assured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been supplied, and this quantity is rising every day. We are pleased that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To get some advice or order, get in touch with us or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | |
p6 | m6 | |||
EN 1.2510 Equiv. | - | 60HRC~ | JBH | JBHM |
EN 1.2510 Equiv. | Electroless Nickel Plating | 60HRC~ | JBHN | JBHMN |
EN 1.4125 Equiv. | - | 50HRC~ | JBHC | JBHMC |
Part Number | - | L |
JBH5 | - | 8 |
JBHUN12 | - | 12 |
Part Number | L Selection | Thickness (N) | R | H | T | D | D Tolerance | Unit Price | ||||||||||||||||||
Type | d | D Tolerance | p6 | m6 | JBH JBHM | JBHN JBHMN | JBHC JBHMC | |||||||||||||||||||
No Surface Treatment | Electroless Nickel Plating | |||||||||||||||||||||||||
(p6) JBH JBHN JBHC (m6) JBHM JBHMN JBHMC | 2 | G6 | +0.008 +0.002 | H7 | +0.010 0 | 5 | 6 | 8 | 10 | 12 | 1.5 | 0.8 | 9 | 2.5 | 5 | +0.020 +0.012 | +0.012 +0.004 | - | - | |||||||
3 | 5 | 6 | 8 | *10 | 12 | 2 | 11 | 7 | +0.024 +0.015 | +0.015 +0.006 | ||||||||||||||||
4 | +0.012 +0.004 | +0.012 0 | *5 | 6 | 8 | 10 | 12 | 15 | *16 | 20 | 2 | 1 | 12 | 3 | 8 | |||||||||||
5 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 2.5 | 14 | 10 | |||||||||||||||
6 | 5 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2 | ||||||||||||||||
8 | +0.014 +0.005 | G6 | +0.014 +0.005 | 2 | 2 | 16 | 4 | 12 | +0.029 +0.018 | +0.018 +0.007 | ||||||||||||||||
10 | 6 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 2.5 | 19 | 15 | |||||||||||||||
12 | +0.017 +0.006 | +0.017 +0.006 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 3 | 22 | 18 | |||||||||||||
13 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 4.5 | 26 | 5 | 22 | +0.035 +0.022 | +0.021 +0.008 | - | ||||||||||||
15 | 10 | *12 | *15 | *16 | *20 | *25 | *30 | 5 | 30 | 25 | ||||||||||||||||
16 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 26 | |||||||||||||||||
20 | +0.020 +0.007 | +0.020 +0.007 | 12 | 15 | 16 | 20 | 25 | 30 | 5 | 3 | 35 | 6 | 30 | |||||||||||||
25 | 16 | 20 | 25 | *30 | 35 | 5 | 40 | 35 | +0.042 +0.026 | +0.025 +0.009 |