We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HJPRAM10-L[10-50/0.01]-F[10-30/1]
Description
Height Adjust Pins/Hex
Stock availability:
On request
If you are looking for MISUMI HJPRAM10-L[10-50/0.01]-F[10-30/1], communicate with FAMAGA, the world's principle retailer of streamlined equipment. Our company has worked for more than ten years - these are years of experience, which are symbolized in the quality of products and special attention to each customer. We esteem everyone, who conspired with us - hence, our regular customers get the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the planet Germany, United Kingdom, San Marino, New Zealand, El Salvador, Albania, United States, Zambia, Russia, Oman, Indonesia, Senegal, The Gambia, Togo, Eritrea, Nicaragua, Niger, China, Japan, East Timor, Netherlands, Philippines, Malta, Samoa, Grenada, Afghanistan, Kyrgyzstan, Azerbaijan, Guatemala, Tunisia, Syria, Ghana, Mozambique, Poland, Seychelles, Kazakhstan, Brunei, Swaziland, Austria, United Arab Emirates, Yemen, Qatar, Luxembourg, India, Tajikistan, Lithuania, Ireland, Bolivia, Burkina Faso, Brazil. A well-elaborated logistics network and a partnership network allow us to dispatch our goods anywhere in the world with no delay without disreputing product quality.
A specific source of pride for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that users choose FAMAGA again and again, and we strive to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To inquire or place an order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Type | ||
B Fixed F Fixed | B Fixed F Configurable | B Selectable F Fixed | |||
EN 1.7220 Equiv. | - | Treated Hardness: 46 ~ 50HRC | JPRA | JPRAM | JPRFA |
Black Oxide | Treated Hardness: 46 ~ 50HRC | BJPRA | BJPRAM | BJPRFA | |
Hard Chrome Plating Plating Thickness: 3µm or more | Treated Hardness: 46 ~ 50HRC Plating Hardness: 750HV ~ | HJPRA | HJPRAM | HJPRFA | |
EN 1.4301 Equiv. | - | - | SJPRA | SJPRAM | SJPRFA |
EN 1.4125 Equiv. | - | Treated Hardness: 50 ~ 55HRC | CJPRA | CJPRAM | CJPRFA |
Part Number | - | L | - | B | - | F | |
(Hex, B and F Fixed) | JPRA4 | - | 10.00 | ||||
(Hex, B Fixed and F Configurable) | JPRAM8 | - | L15.00 | - | F12 | ||
(Hex, B Selectable and F Fixed) | JPRFA6 | - | 20.00 | - | 8 |
Part Number | L 0.01mm Increment | B | F | ||||||||
Type | M (Coarse) | * Tightening Torque N•cm | Standard | Selection | Standard | 1mm Increment | |||||
B, F Fixed JPRA BJPRA HJPRA SJPRA CJPRA | B Fixed and F Configurable JPRAM BJPRAM HJPRAM SJPRAM CJPRAM | B Selectable and F Fixed JPRFA BJPRFA HJPRFA SJPRFA CJPRFA | 3 | 147 | 2.00~10.00 | 6 | 5 | 5 | 3~36 (M≤F≤Mx3) | ||
4 | 333 | 7 | 6 | 6 | |||||||
5 | 676 | 8 | 7 | 8 | |||||||
6 | 1156 | 5.00~30.00 | 10 | 8 | |||||||
8 | 2803 | 13 | 10 | 12 | 10 | ||||||
10 | 5557 | 10.00~50.00 | 17 | 12 | 13 | 14 | 12 | ||||
12 | 9702 | 19 | 14 | 17 | 15 |