We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HWPM4-P[4-7/0.01]-Q[2-6/0.01]-L[4-8/1]-B[2-15/0.1]-E[1-8/0.1]-F[2-15/0.1]
Description
Double Pilot/Standard/Configurable
Stock availability:
On request
If you are questing MISUMI HWPM4-P[4-7/0.01]-Q[2-6/0.01]-L[4-8/1]-B[2-15/0.1]-E[1-8/0.1]-F[2-15/0.1], communicate with FAMAGA, the world's chief distributor of factory-made equipment. Our company has existed for more than ten years - these are cycles of experience, which are expressed in the quality of items and personalseparate attention to each buyer. We appreciate everyone, who liased with us - so, our regular purchasers procure the most acceptable purchase conditions and discounts on the industrial equipment market. Now, there are more than 4 thousand such customers, and we constantly form new agreements. More than 650 agreements are achieved per day, because FAMAGA operates all over the world Germany, United Kingdom, Brunei, Guyana, Latvia, New Zealand, Luxembourg, Cyprus, Namibia, Jamaica, Macedonia, Singapore, Philippines, Turkmenistan, Estonia, Uzbekistan, Angola, Poland, Albania, Rwanda, Oman, Chile, Bolivia, Togo, Burkina Faso, Panama, Madagascar, China, Costa Rica, Uruguay, Nicaragua, Russia, Zimbabwe, Kuwait, Brazil, Georgia, Argentina, Mexico, Seychelles, Serbia, Yemen, Sweden, Kyrgyzstan, Haiti, Syria. A advanced logistics system and a partnership network cheer us to deliver our products anywhere in the planet on-time without undermining product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of industrial equipment.
All items from FAMAGA are guaranteed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this amount is amounting every day. We are pleased that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically advanced industrial equipment so as to stay on the top.
To consult or make a request, call us by phone or write to the online chat on our site. You can also send a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Press Fit | Tapped | |
D Tolerance m6 | D Tolerance p6 | D Tolerance g6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | WPM | WPP | WPG |
EN 1.4301 Equiv. | - | - | SWPM | - | SWPG |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HWPM | HWPP | HWPG |
Part Number | - | P | - | Q | - | L | - | B | - | E | - | F |
SWPM5 HWPG16 | - - | P7.30 P20.02 | - - | Q5.01 Q15.30 | - - | L10 L18 | - - | B10.5 B12.3 | - - | E5.2 E3.1 | - - | F7.8 F5.0 |
D | m6 | p6 | g6 |
2, 3 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 |
4~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 |
8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 |
12, 16 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 |
20 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | C | Unit Price | |||||
Type | D | WPM WPP | SWPM | HWPM HWPP | ||||||||||
D Tolerance m6 WPM SWPM HWPM | D Tolerance p6 WPP HWPP | 2 | 2.00~4.00 | 1.00~3.00 | 2~6 | 2.0~6.0 | 1.0~3.0 | 2.0~6.0 | 1 | 0.3 | 0 | |||
3 | 3.00~6.00 | 1.00~5.00 | 3~6 | 2.0~10.0 | 1.0~5.0 | 2.0~10.0 | 2 | 0.5 | 1 | |||||
4 | 4.00~7.00 | 2.00~6.00 | 4~8 | 2.0~15.0 | 1.0~8.0 | 2.0~15.0 | 3 | 1 | ||||||
5 | 5.00~8.00 | 2.00~7.00 | 5~10 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | ||||||||
6 | 6.00~10.00 | 2.00~9.00 | 6~12 | |||||||||||
8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | 1.5 | 2 | ||||||||
10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | 2 | ||||||||
12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | 3 | |||||||
20 | 20.00~30.00 | 13.00~29.00 | 20~40 |
Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | M (Coarse) | * Tightening Torque N cm | Unit Price | ||||
Type | D | WPG | SWPG | HWPG | ||||||||||
D Tolerance g6 WPG SWPG HWPG | 6 | 6.00~10.00 | 2.00~9.00 | 6~12 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | 3 | M3 | 147 | 5 | |||
8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | M4 | 333 | 8 | |||||||
10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | M5 | 676 | |||||||
12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||||
20 | 20.00~30.00 | 13.00~29.00 | 20~40 |