We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
HWPG16-P[16-25/0.01]-Q[10-24/0.01]-L[16-32/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1]
Description
Double Pilot/Standard/Configurable
Stock availability:
On request
If you are inspecting MISUMI HWPG16-P[16-25/0.01]-Q[10-24/0.01]-L[16-32/1]-B[5-20/0.1]-E[1-10/0.1]-F[5-20/0.1], communicate with FAMAGA, the world's main producer of industrial equipment. Our company has advanced for more than ten years - these are ages of experience, which are expressed in the quality of goods and particular attention to each customer. We value everyone, who worked with us - so, our regular purchasers get the most attractive purchase terms and discounts on the manufacturing equipment market. At present, there are more than 4 thousand such clients, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA works all over the planet Germany, United Kingdom, Venezuela, Nepal, Russia, Yemen, Bangladesh, Finland, Switzerland, Niger, Qatar, Nigeria, Japan, Cyprus, Belize, Albania, Philippines, Mexico, Botswana, Paraguay, Kyrgyzstan, Cape Verde, Estonia, Seychelles, Netherlands, Bolivia, Swaziland, Serbia, Liberia, Sudan, Turkmenistan, El Salvador, Ecuador, Sweden, Hungary, Malaysia, Slovakia, Indonesia, Latvia, Samoa, Morocco, Mauritius, Austria, Georgia, Haiti. A well-built logistics bond and a partnership network help us to dispatch our elements anywhere in the globe immediately without disreputing product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All outcomes from FAMAGA are verified - we are responsible for the result of our work. Now, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as keep on top of it.
To get some advice or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Surface Treatment | Hardness | Press Fit | Tapped | |
D Tolerance m6 | D Tolerance p6 | D Tolerance g6 | |||
EN 1.2510 Equiv. | - | Treated Hardness: 60 ~ 63HRC | WPM | WPP | WPG |
EN 1.4301 Equiv. | - | - | SWPM | - | SWPG |
EN 1.4301 Equiv. | Hard Chrome Plating Plating Thickness: 3µm or more | Plating Hardness: 750HV ~ | HWPM | HWPP | HWPG |
Part Number | - | P | - | Q | - | L | - | B | - | E | - | F |
SWPM5 HWPG16 | - - | P7.30 P20.02 | - - | Q5.01 Q15.30 | - - | L10 L18 | - - | B10.5 B12.3 | - - | E5.2 E3.1 | - - | F7.8 F5.0 |
D | m6 | p6 | g6 |
2, 3 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 |
4~6 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 |
8, 10 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 |
12, 16 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 |
20 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 |
Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | C | Unit Price | |||||
Type | D | WPM WPP | SWPM | HWPM HWPP | ||||||||||
D Tolerance m6 WPM SWPM HWPM | D Tolerance p6 WPP HWPP | 2 | 2.00~4.00 | 1.00~3.00 | 2~6 | 2.0~6.0 | 1.0~3.0 | 2.0~6.0 | 1 | 0.3 | 0 | |||
3 | 3.00~6.00 | 1.00~5.00 | 3~6 | 2.0~10.0 | 1.0~5.0 | 2.0~10.0 | 2 | 0.5 | 1 | |||||
4 | 4.00~7.00 | 2.00~6.00 | 4~8 | 2.0~15.0 | 1.0~8.0 | 2.0~15.0 | 3 | 1 | ||||||
5 | 5.00~8.00 | 2.00~7.00 | 5~10 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | ||||||||
6 | 6.00~10.00 | 2.00~9.00 | 6~12 | |||||||||||
8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | 1.5 | 2 | ||||||||
10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | 2 | ||||||||
12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | 3 | |||||||
20 | 20.00~30.00 | 13.00~29.00 | 20~40 |
Part Number | P 0.01mm Increment | Q 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | F 0.1mm Increment | m | M (Coarse) | * Tightening Torque N cm | Unit Price | ||||
Type | D | WPG | SWPG | HWPG | ||||||||||
D Tolerance g6 WPG SWPG HWPG | 6 | 6.00~10.00 | 2.00~9.00 | 6~12 | 2.0~20.0 | 1.0~10.0 | 2.0~20.0 | 3 | M3 | 147 | 5 | |||
8 | 8.00~13.00 | 3.00~12.00 | 8~16 | 4 | M4 | 333 | 8 | |||||||
10 | 10.00~15.00 | 3.00~14.00 | 10~20 | 3.0~20.0 | 3.0~20.0 | M5 | 676 | |||||||
12 | 12.00~16.00 | 5.00~15.00 | 12~24 | |||||||||||
16 | 16.00~25.00 | 10.00~24.00 | 16~32 | 5.0~20.0 | 5.0~20.0 | 5 | M8 | 2803 | 12 | |||||
20 | 20.00~30.00 | 13.00~29.00 | 20~40 |