![MISUMI CHPST1-12-P[1.5-3/0.01]](https://static-famaga.fra1.digitaloceanspaces.com/marketing/photo/nameGenyJxGE0.jpeg)
We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
CHPST1-12-P[1.5-3/0.01]
Description
Locating Pilot Pins/Standard
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing MISUMI CHPST1-12-P[1.5-3/0.01], communicate with FAMAGA, the world's principle retailer of machine made equipment. Our company has worked for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each buyer. We value everyone, who joined with us - therefore, our regular consumers bring in the most beneficial purchase forms and discounts on the industrial equipment market. Now, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 transactions are made per day, because FAMAGA works all over the world Germany, United Kingdom, Denmark, Bahamas, Paraguay, Bolivia, Monaco, Liechtenstein, Mali, Namibia, Gambia, Nicaragua, Poland, Russia, East Timor, Philippines, Pakistan, Zambia, Burkina Faso, Albania, Azerbaijan, Morocco, Austria, Mozambique, Seychelles, Latvia, Thailand, Dominica, Costa Rica, Haiti, Bangladesh, Brunei, United States, Georgia, Ireland, Madagascar, Ghana, Botswana, Uganda, Angola, Swaziland, United Arab Emirates, Cyprus. A advanced logistics system and a partnership network guide us to send our items anywhere in the globe quickly without damaging product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the direction of industrial equipment.
All products from FAMAGA are assured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been supplied, and this number is ascending every day. We are happy that clients choose FAMAGA again and again, and we are eager to make more advanced and technologically innovative industrial equipment so as not to lower the bar.
To request or order, phone us or write to the online chat on our site. You can also send a list of the required equipment to the email of organization - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Material | Hardness | B Fixed | B Configurable | |||
| Press Fit | Tapped, Flathead Slot | Press Fit | Tapped | |||
| Without Flathead Slot | Flathead Slot | |||||
| EN 1.2510 Equiv. | Treated Hardness: 60 ~ 63HRC | HPST | HPSTM | HPSF | HPSFS | HPSFM |
| EN 1.4301 Equiv. | - | SHPST | SHPSTM | SHPSF | - | SHPSFM |
| EN 1.4125 Equiv. | Treated Hardness: 50 ~ 55HRC | CHPST | CHPSTM | CHPSF | CHPSFS | CHPSFM |
| Part Number | - | L | - | P | - | B |
| HPST5 HPSF4 | - - | 15 10 | - - | P7.20 P5.05 | - | B1.20 |
| Part Number | L Selection | P 0.01mm Increment | B | E | M (Coarse) | * Tightening Torque N • cm | Unit Price | |||||||||||
| Type | D | D dim. Tolerance | HPST | SHPST | CHPST | HPSTM | SHPSTM | CHPSTM | ||||||||||
| Standard HPST SHPST CHPST | Tapped Flathead Slot HPSTM SHPSTM CHPSTM Applicable when D≥5. | 1 | +0.012 +0.007 | 12 | 1.50~3.00 | 1 | 3 | 3 | - | - | - | - | - | |||||
| 2 | 12 | 2.50~4.00 | 4 | - | - | - | ||||||||||||
| 3 | 12 | 15 | 4.00~6.00 | 2 | - | - | - | |||||||||||
| 4 | 12 | 15 | 5.00~7.00 | 5 | - | - | - | |||||||||||
| 5 | 12 | 15 | 6.00~8.00 | M3 | 147 | |||||||||||||
| 6 | 12 | 15 | 7.00~9.00 | 6 | ||||||||||||||
| 8 | 15 | 18 | 9.00~13.00 | 3 | M4 | 333 | ||||||||||||
| 10 | 15 | 18 | 11.00~15.00 | M5 | 676 |
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | Unit Price | |||||||||||||
| Type | D | D dim. Tolerance | HPSF | SHPSF | CHPSF | |||||||||||||
| HPSF SHPSF CHPSF | 1 | +0.012 +0.007 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 1.50~3.00 | 1.00~5.00 | 3 | 1 | |||||
| 2 | 4 | 5 | 6 | 8 | 10 | 12 | 2.50~4.00 | 1.00~10.00 | 4 | |||||||||
| 3 | 5 | 6 | 8 | 10 | 12 | 15 | 4.00~6.00 | 1.00~10.00 | ||||||||||
| 4 | 5 | 6 | 8 | 10 | 12 | 15 | 5.00~7.00 | 1.00~10.00 | 5 | |||||||||
| 5 | 5 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | ||||||||||
| 6 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | ||||||||||
| 8 | 8 | 10 | 12 | 15 | 9.00~13.00 | 1.00~15.00 | ||||||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 |
| Part Number | L Selection | P 0.01mm Increment | B 0.01mm Increment | E | M (Coarse) | * Tightening Torque N • cm | Unit Price | ||||||||||||
| Type | D | D dim. Tolerance g6 | HPSFS | CHPSFS | HPSFM | SHPSFM | CHPSFM | ||||||||||||
| Without Flathead Slot HPSFS CHPSFS | Flathead Slot HPSFM SHPSFM CHPSFM | 5 | -0.004 -0.012 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | 5 | M3 | 147 | ||||||
| 6 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | |||||||||||
| 8 | -0.005 -0.014 | 8 | 10 | 12 | 15 | 18 | 9.00~13.00 | 1.00~15.00 | M4 | 333 | |||||||||
| 10 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | M5 | 676 |
