We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPDHR10L-P[8-16/0.01]-W[3-16/0.01]-R[0.2-7.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are questing MISUMI KJPDHR10L-P[8-16/0.01]-W[3-16/0.01]-R[0.2-7.99/0.01]-S[5-15/0.01]-F[1-7.5/0.1]-L[5-20/1]-B[5-20/1], reach FAMAGA, the world's dominant provider of industrial equipment. Our company has progressed for more than ten years - these are years of experience, which are outlined in the quality of merchandises and individual attention to each buyer. We value everyone, who engaged with us - thus, our regular clients accept the most acceptable purchase terms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such buyers, and we constantly compose new agreements. More than 650 purchases are terminated per day, because FAMAGA works all over the planet Germany, United Kingdom, Norway, Uruguay, Eswatini, Canada, Colombia, Cameroon, Papua New Guinea, El Salvador, Mauritius, Guinea, Libya, Fiji, Romania, Bolivia, Netherlands, Russia, Rwanda, Seychelles, Georgia, Liberia, Afghanistan, Mali, Swaziland, Nicaragua, The Bahamas, Croatia, Guyana, Paraguay, Togo, Vietnam, Kenya, Cape Verde, Ireland, Hungary, Mauritania, Tonga, Brunei, Denmark, Finland, Qatar, South Korea, Madagascar, Brazil, Dominica, Suriname. A well-developed logistics system and a partnership network assist us to ship our products anywhere in the planet immediately without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to common cause. We accept into our team only experts, who already have experience in the direction of manufacturing equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically modern industrial equipment so as not to lower the bar.
To ask a question or place an order, phone us or write a message to the online chat on our site. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSR | KJPDR | KJPGDR |
EN 1.1191 Equiv. | 45HRC~ | KJPSHR | KJPDHR | KJPGDHR |
EN 1.4301 Equiv. | - | - | KJPDRS | KJPGDRS |
Part Number (TYPE, D) | - | P | - | W | - | R | - | S | - | F | - | L | - | B |
KJPDR16 | - | P10.97 | - | W8.57 | - | R0.5 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~28.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | |||||||
Straight | Stepped Straight | D | P | W | R | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | |||||||||
(EN 1.1191 Equiv.) KJPSR (EN 1.1191 Equiv. Hardened) KJPSHR | (EN 1.1191 Equiv.) KJPDR (EN 1.1191 Equiv. Hardened) KJPDHR (EN 1.4301 Equiv.) KJPDRS | (EN 1.1191 Equiv.) KJPGDR (EN 1.1191 Equiv. Hardened) KJPGDHR (EN 1.4301 Equiv.) KJPGDRS | 8 | 4.00~6.00 | PW>S (W3.01) | 0.20R3.00~5.00 | 0.3~2.5 | Straight
5~30*1
Stepped Straight
5~20 | 5~20 | M4 | |
10 | 4.00~6.00 | 3.00~5.00 | 0.3~3.5 | M5 | |||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | |||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | |||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | |||||||
25 | 12.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | |||||||
10L | 8.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | |||||||
12L | 10.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | |||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | |||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |