We are not the manufacturer, authorised distributor or authorised representative of the MISUMI brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MISUMI
Country
Japan
Part number
KJPSCC10-P[4-8/0.01]-W[3.01-7.99/0.01]-L[5-30/1]
Description
Slot Pins for Inspection Jigs/Oval Straight Type
Stock availability:
On request
If you are looking for MISUMI KJPSCC10-P[4-8/0.01]-W[3.01-7.99/0.01]-L[5-30/1], communicate with FAMAGA, the world's central company of industrialized equipment. Our company has lasted for more than ten years - these are cycles of experience, which are symbolized in the quality of products and personalseparate attention to each orderer. We esteem everyone, who conspired with us - hence, our regular customers obtain the most helpful purchase forms and discounts on the factory-made equipment market. At this time, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Zambia, Bahrain, San Marino, Mongolia, Fiji, Guyana, Macedonia, Monaco, United Arab Emirates, Honduras, Azerbaijan, Australia, Qatar, El Salvador, Samoa, The Gambia, Panama, Turkey, Nepal, Bolivia, Sweden, Kyrgyzstan, Haiti, Malaysia, China, Croatia, New Zealand, Pakistan, Albania, Lithuania, United States, Mexico, Bulgaria, Madagascar, Armenia, Mauritius, Iceland, Burkina Faso, Estonia, Yemen, Syria, Austria, Philippines, Tunisia. A well-built logistics connection and a partnership network allow us to send our units anywhere in the world immediately without discrediting product quality.
A particular source of dignity for FAMAGA is its personnel, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of manufacturing equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as to stay on the top.
To inquire or order, get in touch with us or write a message to the online chat on our site. You can also dispatch a list of the needful equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Material | Hardness | Straight | Stepped Straight | |
Type | Type | |||
P0 -0.02 | S0 -0.02/F0 -0.05 | Sg6/F0 -0.03 | ||
EN 1.1191 Equiv. | - | KJPSC | KJPDC | KJPGDC |
EN 1.1191 Equiv. | 45HRC~ | KJPSHC | KJPDHC | KJPGDHC |
EN 1.4301 Equiv. | - | KJPSCS | KJPDCS | - |
1 EN 1.4125 Equiv. | 45~50HRC | KJPSCC | - | KJPGDCC |
Part Number (TYPE, D) | - | P | - | W | - | S | - | F | - | L | - | B |
KJPDC16 | - | P10.97 | - | W8.47 | - | S6.00 | - | F2.0 | - | L5 | - | B10 |
S | g6 |
3.00 | -0.002 -0.008 |
3.01~ 6.00 | -0.004 -0.012 |
6.01~10.00 | -0.005 -0.014 |
10.01~18.00 | -0.006 -0.017 |
18.01~29.00 | -0.007 -0.020 |
Part Number | 0.01mm Increment | 0.1mm Increment | 1mm Increment | M | ||||||
Straight | Stepped Straight | D | P | W | S Stepped Type only | F(FS/2) Stepped Type only | L | B Stepped Type only | ||
(P0 -0.02) | (S0 -0.02/F0 -0.05) | (Sg6/F0 -0.03) | ||||||||
(EN 1.1191 Equiv.) KJPSC (EN 1.1191 Equiv. Hardened) KJPSHC (EN 1.4301 Equiv.) KJPSCS (EN 1.4125 Equiv.) KJPSCC | (EN 1.1191 Equiv.) KJPDC (EN 1.1191 Equiv. Hardened) KJPDHC (EN 1.4301 Equiv.) KJPDCS | (EN 1.1191 Equiv.) KJPGDC (EN 1.1191 Equiv. Hardened) KJPGDHC (EN 1.4125 Equiv.) KJPGDCC | 8 | 4.00~6.00 | P>W>S (W3.01) | 3.00~5.00 | 0.3~2.5 | Straight 5~30*1 Stepped Straight 5~20 | 5~20 | M4 |
10 | 4.00~8.00 | 3.00~7.00 | 0.3~3.5 | M5 | ||||||
12 | 4.00~10.00 | 3.00~9.00 | 0.5~4.5 | M5 | ||||||
16 | 6.00~14.00 | 4.00~13.00 | 0.5~6.5 | M5 | ||||||
20 | 10.00~18.00 | 6.00~17.00 | 1.0~8.5 | M5 | ||||||
25 | 14.00~22.00 | 8.00~21.00 | 2.0~10.5 | M5 | ||||||
10L | 10.00~16.00 | 5.00~15.00 | 1.0~7.5 | M5 | ||||||
12L | 12.00~20.00 | 6.00~19.00 | 2.0~9.5 | M5 | ||||||
16L | 16.00~25.00 | 8.00~24.00 | 2.0~12.0 | M5 | ||||||
20L | 20.00~30.00 | 10.00~29.00 | 2.0~14.5 | M5 |